Abstract:This study concentrates on the dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Then the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, then were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens under different cooling methods were conducted. The change in mechanical properties of high‐temperature rock after cooling treatments is getting increasing attention. However, only a few studies have been conducted on the dynamic characteristic parameters. Therefore, this study aims to perform a dynamic damage analysis of high‐temperature rocks subjected to different thermal shocks. Accordingly, the specimens were grouped and heated to 200°C, 400°C, 600°C, and 800°C, and they were cooled by natural, water, and liquid nitrogen cooling. Ultrasonic detector tests, the split Hopkinson pressure bar experiments, and scanning electron microscope tests of the high‐temperature granite specimens were conducted using different cooling methods. Subsequently, the change rules of dynamic stress–strain curves and properties were calculated, and the morphology and micromorphology of fragments were compared. Based on the outcomes, the thermal shock damage and impact damage evolution were evaluated and quantified. The findings revealed that when the treatment temperature increases, the dynamic peak stress and elastic modulus decrease, while the peak strain increases, and the effect of rapid cooling was more significant in the influence of rock dynamic characteristics. Moreover, when the damage factor is more than 0.51, the change of dynamic stress‐strain is accelerated, leading to the instability of the structure under the impact load. The research results are expected to provide an adequate theoretical basis for the development and utilization of geothermal resources and underground engineering applications.

Effect of Open Fire on Dynamic Compression Mechanical Behavior of Granite under Different Strain Rates

Experimental investigation on the effect of open fire on the tensile properties and damage evolution behavior of granite

Uniaxial Compressive Behavior of Granite at High Strain Rates

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Preparing rock samples using high temperature heating damage method and its application

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Experimental Investigation on the Influence of Wave Impedance on Dynamic Mechanical Response of Granites undergone High Temperature

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Experimental study of the influence of temperature and cooling method on dynamic mechanical properties and damage of granite

Dynamic response and fracture characteristics of thermally-treated granite under dynamic loading

Investigations of the Progressive Damage and Failure Behaviors of Thermally Treated Granite Under the Coupling Action of Biaxial Stress Constraint and High Strain Rate

Mechanical and damage evolution characteristics of granite after heating-cooling cycles

Dynamic compression behaviors of heat-treated granite under combined dynamic and static load

Fractal Characteristics and Energy Dissipation of Granite After High-Temperature Treatment Based on SHPB Experiment

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Mechanical test of granite with multiple water–thermal cycles

Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after Different Heating and Cooling Cycles

Impacts of different cooling methods on the dynamic tensile properties of thermal-treated granite

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Effect of Original Pores on Dynamic Characteristics of Granite under Cyclic Impact Loading

Effects of temperature and increasing amplitude cyclic loading on the mechanical properties and energy characteristics of granite