Abstract:Grain refinement strongly strengthens the non‐basal slip of Bi2Te3‐based thermoelectric material, and then increase the carrier concentration, hindering the practical preparation of n‐type Bi2Te3 by ball milling method. In this work, enhancing the ball milling energy can facilitate the recovery effect during hot pressing, which can reduce and stabilize the carrier concentration and achieve high thermoelectric and mechanical performances. The carrier concentration in n‐type layered Bi2Te3‐based thermoelectric (TE) material is significantly impacted by the donor‐like effect, which would be further intensified by the nonbasal slip during grain refinement of crushing, milling, and deformation, inducing a big challenge to improve its TE performance and mechanical property simultaneously. In this work, high‐energy refinement and hot‐pressing are used to stabilize the carrier concentration due to the facilitated recovery of cation and anion vacancies. Based on this, combined with SbI3 doping and hot deformation, the optimized carrier concentration and high texture degree are simultaneously realized. As a result, a peak figure of merit (zT) of 1.14 at 323 K for Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 sample with the high bending strength of 100 Mpa is obtained. Furthermore, a 31‐couple thermoelectric cooling device consisted of n‐type Bi2Te2.7Se0.3 + 0.05 wt.% SbI3 and commercial p‐type Bi0.5Sb1.5Te3 legs is fabricated, which generates the large maximum temperature difference (ΔTmax) of 85 K at a hot‐side temperature of 343 K. Thus, the discovery of recovery effect in high energy refinement and hot‐pressing has significant implications for improving TE performance and mechanical strength of n‐type Bi2Te3, thereby promoting its applications in harsh conditions.

Enhanced Thermoelectric Performance of N-Type Bi2Te2.7Se0.3 Via a Simple Liquid-Assisted Shear Exfoliation

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

Microstructure and thermoelectric properties of porous Bi 2 Te 2.85 Se 0.15 bulk materials fabricated by semisolid powder processing

Enhanced Thermoelectric Properties of N-Type Direction Solidified Bi2Te2.7Se0.3 Alloys by Manipulating Its Liquid State

Synergistic Effect Approaching Record-High Figure of Merit in the Shear Exfoliated N-Type Bi2O2-2xTe2xSe

Thermoelectric Performance Enhancement in N -Type Bi 2 (tese) 3 Alloys Owing to Nanoscale Inhomogeneity Combined with a Spark Plasma-Textured Microstructure

Enhanced Thermoelectric Properties of Highly Textured Bi2O2-xSe1+x with Liquid-Phase Mechanical Exfoliation

Modulation of Vacancy Defects and Texture for High Performance n‐Type Bi2Te3 via High Energy Refinement

Enhancing Thermoelectric Performance of n-Type Bi2Te2.7Se0.3 through Incorporation of Amorphous Si3N4 Nanoparticles

Enhanced Thermoelectric Properties of Bi2O2Se by Bi2Te2.7Se0.3 Addition

High Thermoelectric Properties of Shear-Exfoliation-derived TiS2-AgSnSe2 Nano-Composites Via Ionized Impurity Scattering

Enhanced thermoelectric performance of Bi 2 O 2 Se by MXene addition via liquid assisted shear exfoliation-restacking process

Synergistic Tailoring of Electronic and Thermal Transports in Thermoelectric Se-Free n-Type (Bi,Sb)2Te3

Enhanced Thermoelectric Performance of N-Type Bi2Te2.7Se0.3 by Pyrite CoSe2 Addition

Modulation of Vacancy Defects and Texture for High Performance N-Type Bi2 Te3 Via High Energy Refinement.

Synergistical Enhancement of Thermoelectric Properties in N‐type Bi2O2Se by Carrier Engineering and Hierarchical Microstructure

Thermoelectric Performance Enhancement in BiSbTe Alloy by Microstructure Modulation via Cyclic Spark Plasma Sintering with Liquid Phase

Enhanced Thermoelectric Performance of P‐Type (Bi,Sb)2Te3 by Incorporating Non‐Stoichiometric Ag5Te3 and Refining Te‐Se Ratio

Enhanced thermoelectric performance and mechanical strength of n-type BiTeSe materials produced via a composite strategy

Enhanced Thermoelectric Performance of Te-Doped Bi2Se3−xTex Bulks by Self-Propagating High-Temperature Synthesis

Enhancing the room temperature thermoelectric performance of n-type Bismuth-telluride-based polycrystalline materials by low-angle grain boundaries