Abstract:In vessel retention (IVR) is one of the key severe accident mitigation strategies to maintain reactor pressure vessel (RPV) integrity. IVR designs utilize the reactor pressure vessel lower head to contain molten fuel and rely on external reactor vessel cooling (ERVC) to remove decay heat. The capacity of ERVC is limited by the critical heat flux (CHF) of flow boiling on the outside of the reactor vessel surface. Therefore, the determination of critical heat flux (CHF) is crucial to predict whether the adoption of IVR would be successful in mitigating severe accidents. In 1999, Celeta et.al proposed a superheated layer vapor replenishment model. In this model they postulated that CHF would occur when the superheated layer was occupied by the vapor blanket coming into contact with the heated wall and they successfully predicted the critical heat flux in subcooled water flow boiling under high mass flux, high liquid subcooling and low/medium pressure conditions. To evaluate the practicability of this model in predicting CHF under IVR conditions, CHF experiments were performed under natural circulation conditions on the experiment facility "Test of External Vessel Surface with Enhanced Cooling" (TESEC). Experiments are conducted in a 30 mm wide, 61mm high rectangular flow channel with a 200 mm long heated surface along the flow direction. Two quartz windows are installed at the sidewalls of the flow channel for visualization. In order to simulate various positions of the reactor lower head, experiments at different inclination angles of the test section were conducted. The high speed visualization data at CHF point at various inclination angles were processed and analyzed by a MATLAB code developed by the author. The vapor blanket thickness at various inclination angles was measured from the visualization data and was also predicted by the Celeta model. By using geometry data from high speed images, CHF values were calculated by Celeta model and compared with the experimental results at various inclination angles. Limitations of the Celeta model in adaptation of predicting CHF under IVR conditions were further discussed.

Experimental and Mechanical Research on Chf Characteristics During Combined/Bottom Quenching in Narrow Rectangular Channel

Experimental investigation and a mechanical model of critical heat flux in a narrow rectangular channel

Experimental Study on the Chf Characteristics with Different Coolant Injection Conditions and Degassing Effects on A Downward-Facing Plane

Numerical simulation prediction of critical heat flux for 5 × 5 rod bundle with multiple grid spacers and different cladding materials

An experimental study of the CHF in a square channel with non-uniformly heated rod under low pressure and low flow conditions

The Effects of Surface Orientation, Heater Size, Wettability, and Subcooling on the Critical Heat Flux Enhancement in Pool Boiling

Prediction of Critical Heat Flux for Subcooled Flow Boiling in Annulus and Transient Surface Temperature Change at CHF

Research on prediction of non-uniform heated rod bundle CHF based on subchannel analysis code coupling modified mechanistic model

A Critical Heat Flux Model for Saturated Flow Boiling on the Downward Curved Heated Surface

Separate factors’ effects on CHF for flow boiling in an inclined rectangular channel under low mass flux

A CHF Correlation and Flow Pattern Observation on a Downward-Facing Boiling Surface

Prediction Of subcooled water flow boiling critical heat flux (CHF) at low pressure

CHF enhancement of downward-facing saturated pool boiling on the SCGS-modified surfaces with multi-scale conical pin fin structures

Experimental investigation on transition boiling during reflooding in a narrow rectangular channel with high wall temperature

Subchannel Analysis of Critical Heat Flux in Radially Non-Uniform Heated Rod Assembly at Low Flow Rate

Numerical investigation of critical heat flux during subcooled flow boiling in a vertical rectangular Mini-channel

CFD study on flow-boiling characteristics and predicting critical heat flux under natural circulation conditions of IVR-ERVC

Numerical investigation on critical heat flux for 5 × 5 fuel assemblies with a wide range of working conditions

Boiling heat transfer and CHF for subcooled water flowing in a narrow channel due to power transients

Study on the Prediction of DNB-Type Critical Heat Flux in Rod Bundle Under Motion Conditions

Evaluation of Passive Circulation Flow Characteristics and Chf under In-Vessel Retention