Abstract:This study aims to enhance the rheological behavior of SiC/Clay paste with the use of 3 types of polymers (CMC, PEG, and PVA) to obtain better printability through the Direct ink writing method pastes prepared by stirring polymer solutions with SiC/Clay powders. Rheometry and zeta potential tests are used to characterize pastes properties. 20 x 20 mm scaffolds were 3D printed then dried for 24h at room temperature and sintered at 1300°C for 1h to obtain the mullite phase in the final product. In this study, we investigated the impact of polyethylene glycol, sodium carboxymethyl cellulose, and polyvinyl alcohol on the rheological behavior, printability, and mechanical/physical properties of 3D‐printed scaffolds for high‐temperature applications using SiC/clay ceramic paste. Employing the Direct Ink Writing method, varying concentrations of each polymer (PEG: 2.5%–10% weight, CMC: .6%–1.8% weight, PVA: .25%–1% weight) were incorporated into the composition. The resulting SiC/clay paste, with adjusted additive content, was used to 3D‐print scaffold structures through Direct Ink Writing. Sintering of clay‐bonded SiC samples were carried out at 1300°C for 1 h in an ambient atmosphere. The research revealed that altering the additive amounts significantly influenced the rheological behavior, mechanical properties, and physical characteristics of the printed specimens. Notably, the ideal properties with additive concentrations (10% wt PEG, 1% wt PVA, and .6% CMC) were identified, providing the best outcomes in terms of printability and firing results. High density samples with 2.09, 1.93, and 1.79 g/cm3, high compression strength of 20.82, 14.5 and 12.53 MPa with 32.26%, 42.5%, and 52.63% open porosity for samples containing PVA, CMC, and PEG modifiers were obtained, respectively. Additionally, the study led to the development of a high solid loading printable paste with an 80% weight.

The Rheological Behaviors and Overcuring Effect of Fiber-Reinforced Polyamine-Coated Silica Paste and the Mechanical Properties of the Composites Via Stereolithography

The fabrication of fiber-reinforced polyamine-coated silica paste and the mechanical properties of SiO2/SiO2 composites via stereolithography combined with silica sol impregnation

Fabrication and properties of SiO2f/SiO2 composite ceramic based on stereolithography technology

Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing

Investigating the effect of polymer additives on the rheology of SiC/clay paste for use in Direct Ink Writing method

Fabrication by stereolithography of fiber-reinforced fused silica composites with reduced crack and improved mechanical properties

Preparation of Cf/Si3N4 composites based on vat photopolymerization combined with precursor infiltration and pyrolysis

Microstructure and mechanical properties of continuous carbon fiber-reinforced SiC ceramic composite fabricated by direct ink writing

Rheological Properties of Composite Binder Paste Containing Different Types of Silica Fume

Rheology and Printability of a Porcelain Clay Paste for DIW 3D Printing of Ceramics with Complex Geometric Structures

Effect of TMAH as a modifier on the performance of Si3N4 stereolithography pastes

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

Relation Between Rheological and Curing Behavior of Inorganic Foam Slurries in the Gel-Casting Process

of glass dust and glass fi ber as fl uxing agents for cerami fi able silicone rubber composites

Reinforcement of Silicon-Containing Arylacetylene/Quarts Fiber Composites by Poly(imide-Co-siloxane) Macromolecular Coupling Agent

Effects of silanization and silica enrichment of carbon fibers on interfacial properties of methylphenylsilicone resin composites

Enhanced Mechanical Properties of PUMA/SiO2 Ceramic Composites via Digital Light Processing

SiC Paste with High Curing Thickness for Stereolithography

Simultaneous improvement of interfacial bonding and thermal resistance of carbonaceous fiber/silicone composite coatings modified with aniline-methyl-triethoxysilane

Effects of Poly(methylphenylsiloxane) Coating on High Silica Glass Fiber/Phosphate Composites

Preparation and Mechanical Properties of Carbon Fiber Reinforced Geopolymer Composites