Abstract:Silicone rubber (SR) has excellent resistance to high temperatures, and carbon fiber (CF) is a commonly reinforced material. However, the application of carbon fiber in SR composites is limited by the large difference in modulus between the two materials. In order to improve the interfacial bonding of the composites and to exert the reinforcement of carbon fibers, a modulus transition interface, a "flexible-rigid" structure was constructed between CF and SR by coating polydopamine-polyethyleneimine@silica (PDA-PEI@SiO 2 ) on the carbon fiber surface. The results show that the "flexible-rigid" structure of the PDA-PEI@SiO 2 layer not only enhanced the mechanical properties but also improved the thermal resistance and wave-transmission properties of the CF/SR composites. Surface microscopy and structural analysis showed that the "flexible-rigid" structure was successfully coated on the fiber surface, and significantly improved the roughness of the fiber surface. It provided the mechanical meshing between the fiber and matrix when the CF/SR composites were subjected to the tensile loads. The tensile strength and elongation of the SR composite with CF-A-E@8SiO 2 were 37.16 % and 27.46 % higher than that with unmodified CF, respectively. The electrical test showed that the "flexible-rigid" structure could reduce the dielectric constant and dielectric loss of CF/SR composites, thereby improving the wave-transmission properties. Further mechanism analysis of the interfacial bonding showed that abundant hydrogen bonds in the "flexible-rigid" structure at the interface promoted stress dissipation and avoided stress concentration. Meanwhile, the formation of Si-O-Si with high bonding energy also protected the interface from destruction. The thermogravimetric analysis (TGA) found that the introduction of Si-O-Si bonds could significantly improve the thermal resistance of the CF/SR composites at 350 °C for 2 h. It provides guidance for the improvement of the interface bonding in the fiber/rubber composite as well as its functionality.

Reinforcement of Silicon-Containing Arylacetylene/Quarts Fiber Composites by Poly(imide-Co-siloxane) Macromolecular Coupling Agent

Reinforcing And Toughening Qf/Psa With Silane Coupling Agent Containing Poly(Imide Siloxane)

Reinforcement and Tougheness of Quartz Fiber/Silicon-containing Arylacetylene with Heat-resistant Polyetherimide Macromolecular Coupling Agent

INTERFACIAL MODIFICATION OF QUARTZ FIBER REINFORCED SILICON-ARYLACETYLENE-CONTAINING RESIN COMPOSITE BY COUPLING AGENT

Study on the Interface of Acetylene Silazane (SZ) Modified QF/PSA Composites

Synthesis and thermal stability of a novel acetylene end-capped silicon-containing polyimide coupling agent with a silane pendant group

Surficial Modification of Quartz Fiber by AS-1 and Its Influence on Reinforced Silicon-Arylacetylene-Containing Resin Composite Interface

Preparation and Ablative Behaviors of Carbon Fiber‐reinforced Polydimethylsiloxane‐co‐poly(silylene Acetylenearyleneacetylene) Composites

Interfacial Strengthening Of Quartz Fabrics Reinforced Silicon-Containing Arylacetylene Composites

Direct grafting of octamaleamic acid-polyhedral oligomeric silsesquioxanes onto the surface of carbon fibers and the effects on the interfacial properties and anti-hydrothermal aging behaviors of silicone resin composites

Influence Of The Coupling Agent On The Mechanical Properties Of Sicf/Poly(Phenylene Benzobisoxazole) Composites

High Performance SiC/SiOC Composites with in Situ Carbon Interface

Facile Strategy of Improving Interfacial Strength of Silicone Resin Composites Through Self-Polymerized Polydopamine Followed via the Sol-Gel Growing of Silica Nanoparticles onto Carbon Fiber

Effects of Silsesquioxane Coating Structure on Mechanical Interfacial Properties of Carbon Fibre/polyarylacetylene Composites

Effects of silanization and silica enrichment of carbon fibers on interfacial properties of methylphenylsilicone resin composites

Polyimide/Silica Nanocomposites with Enhanced Tensile Strength: Size Effects and Covalently Bonded Interface

Improving the Interfacial Strength of Silicone Resin Composites by Chemically Grafting Silica Nanoparticles on Carbon Fiber

Interfacial enhancement by constructing a "flexible-rigid" structure between high-modulus fillers and low-modulus matrix in carbon fiber/silicone rubber composites

Fabrication, Microstructures and Properties of SiCf/SiC Composites Prepared with Two Kinds of SiC Fibers As Reinforcements

Preparation of Amorphous Composites with Polymer-Derived Silicon Nitride Matrix Reinforced by Three-Dimensional Silica Fiber

Largely enhanced mechanical and dielectric properties of paper-based composites via in situ modification of polyimide fibers with SiO2 nanoparticles