Abstract:Polyimide (PI) composite films with enhanced mechanical properties were prepared by incorporating modified fumed silica (FS) particles while preserving their optical and thermal characteristics. The PI matrix was synthesized using a fluorinated diamine, a fluorinated dianhydride, and a rigid biphenyl dianhydride via chemical imidization. Commercially available FS particles, including unmodified FS particles (0-FS) and particles modified with dimethyl (2-FS), trimethyl (3-FS), octyl (8-FS), octamethylcyclotetrasiloxane (D4-FS), and polydimethylsiloxane (PDMS-FS) were used. Scanning electron microscope images and nitrogen adsorption–desorption isotherms revealed well-defined porous structures in the FS particles. The water contact angles on the composite films increased compared to those of the pristine PI films, indicating improved water resistance. The PI/0-FS films exhibited a typical trade-off relationship between tensile modulus and elongation at break, as observed in conventional composites. Owing to the poor compatibility and agglomeration of the PDMS-FS particles, the PI/PDMS-FS composite films exhibited poor mechanical performance and diminished optical characteristics. Although the longer-chained FS particles (8- and D4-FS) improved the tensile modulus of the PI film by up to 12%, a reduction of more than 20% in toughness was observed. The PI composite films containing the methylated FS particles (2- and 3-FS) outperformed 8- and D4-FS in terms of mechanical properties, with PI/3-FS films showing an over 10% increased tensile modulus (from 4.07 to 4.42 GPa) and 15% improved toughness (from 6.97 to 8.04 MJ/m3) at 7 wt. % silica loading. Except for the PI/PDMS-FS composites, all composite film samples exhibited more than 86% transmittance at 550 nm. Regarding thermal properties, the glass transition temperature (Tg) and thermal stability remained stable for most composite films. In addition, PI/3-FS films demonstrated enhanced dimensional stability with lower coefficients of thermal expansion (from 47.3 to 34.5 ppm/°C). Overall, this study highlights the potential of incorporating specific modified FS particles to tailor the mechanical, optical, and thermal properties of PI composite films.

Constructing high‐polarization silica for polyimide‐based nanocomposites with enhanced dielectric permittivity and mechanical performances: Molecular dynamics simulations

Preparation and Dielectric Properties of Polyimide/silica Nanocomposite Films Prepared from Sol–gel and Blending Process

Silica/polyimide Hybrids and Their Dielectric Properties. I. Preparation with an Improved Sol–gel Process with Poly(amic Acid) As the Precursor

PREPARATION AND STUDY ON STRUCTURE OF THE POLYIMIDE/SILICA HYBRID AND NANOCOMPOSITE FILMS

Interface‐enhanced polyimide‐based nanocomposites with superior dielectric energy storage properties

Polyhedral oligosilsesquioxane-modified boron nitride enhances the mechanical properties of polyimide nanocomposites

Enhanced performance of low-dielectric siloxane-polyimide copolymers: Synthesis and properties

How interfacial strength affects dielectric performance in Silica/Poly(methyl acrylate) nanocomposites?

Influence of the acceptor-fillers on the dielectric properties of polyimide composites

Enhanced Interfacial and Dielectric Performance for Polyetherimide Nanocomposites through Tailoring Shell Polarities

Synthesis and Properties Comparison of Low Dielectric Silicon Containing Polyimides.

Effect of Hyperbranched Polyimide on Nanoscale Dispersion of SiO2 in Linear Polyimides

Dielectric Property and Space Charge Behavior of Polyimide/Silicon Nitride Nanocomposite Films

Enhancing the dielectric properties of polyimide-based composites with donor-doped SiO 2

High Electrical and Mechanical Properties Obtained in A Polyimide Based Nanocomposite with Sandwich Structure via Multi‐Dimensional Design

Synthesis and Characterization of Nanocomposite of Polyimide-Silica Hybrid from Nonaqueous Sol-Gel Process

Enhancing mechanical and thermal properties of blends with novel phenylethynyl-terminated siloxane-containing ortho-hydroxy polyimide

Design of novel silicon-containing alkynyl diamines and their related thermosetting polyimide resins

Tailored Ultralow Dielectric Permittivity in High-Performance Fluorinated Polyimide Films by Adjusting Nanoporous Characterisitics

Largely enhanced mechanical and dielectric properties of paper-based composites via in situ modification of polyimide fibers with SiO2 nanoparticles

Enhanced Mechanical and Thermal Properties of Polyimide Films Using Hydrophobic Fumed Silica Fillers