Abstract:Reaction between aluminum and water offers a simple way for hydrogen generation. However, the passive oxide film subsequently formed on Al would become a major obstacle for its continuous reaction. Gallium was proved to be an effective way to remove the passive oxide film through penetrating into Al granules, which fosters the reaction between Al and water. However, fabrications of Al–Ga alloy so far are generally highly time and energy consuming. Here, unlike the existing strategies of using solid state Al-rich alloys for the reaction system, the liquid phase alloy was introduced and prepared to develop an extremely simple source for hydrogen generation where the mass percentage of Al can be less than 1%. Such conceptual innovation would help maintain the alloy in liquid state which thus allows for rather convenient operation. To probe into the methodology, the dynamic hydrogen generation phenomenon of such Al-fed liquid phase GaIn alloy inside NaOH electrolyte was disclosed. According to the experimental observations, the hydrogen was generated mainly at the interface between the liquid metal and the Petri dish rather than the liquid metal-electrolyte interface. Homogenous hydrogen generation only takes place at the liquid–solid interface while heterogeneous hydrogen generation from the moving accumulated Al granules happens on all surfaces. The present finding is expected to open a new way towards low cost and straightforward hydrogen generation. It would also help better understand the mechanisms lying behind as well as the dynamic traveling behaviors of the aluminum powered gallium alloy machine.

Study on the Liquid Phase-Derived Activation Mechanism in Al-rich Alloy Hydrolysis Reaction for Hydrogen Production

Hydrogen production performance of an Al-Ga-In-Sn quaternary alloy

Instant Hydrogen Production Using Ga-In-Sn-Bi Alloy-Activated Al-water Reaction for Hydrogen Fuel Cells

The Superior Hydrogen-Generation Performance of Multi-Component Al Alloys by the Hydrolysis Reaction

Comparative Study on Activation of Aluminum with Four Liquid Metals to Generate Hydrogen in Alkaline Solution

Hydrolysis-Based Hydrogen Generation Investigation of Aluminum System Adding Low-Melting Metals

Preparation of high active Al-Ga-In-Sn alloy by alloying & ball milling method and its hydrogen production via water splitting

Sn-free Al-based on-demand hydrogen production materials for easy recycling

Unveiling the role of indium and tin in Al–Ga based alloys for on-demand hydrogen supply from simulation to validation

Dynamic hydrogen generation phenomenon of aluminum fed liquid phase Ga–In alloy inside NaOH electrolyte

Strategies for Improving Flow Rate Control of Hydrogen Generated by Al-rich Alloys for On-Board Applications

Hydrogen Production Using AlGaInSn Alloy with Semi-Solid Structures

Hydrogen Generation from the Reaction of Al-based Composites Activated by Low-Melting-point Metals/oxides/salts with Water

Metal Substrate Enhanced Hydrogen Production of Aluminum Fed Liquid Phase Ga–In Alloy Inside Aqueous Solution

The Role of Microstructural Length Scale in Hydrogen Generation Features of an Al-Sn-Fe Alloy

Progress in Hydrogen Generation from Al-based Alloy Hydrolysis

Study of the Controllable Reactivity of Aluminum Alloys and Their Promising Application for Hydrogen Generation

Hydrogen Generation from the Hydrolysis of Al-Sn Alloys

Hydrogen production via hydrolysis of Al-eutectic GaInSn composites

Tailoring the hydrogen production behavior of Al-Zn-Sn alloys through their as-solidified microstructures

Development of Cost-Effective Sn-Free Al-Bi-Fe Alloys for Efficient Onboard Hydrogen Production through Al–Water Reaction