Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Long-range BOTDA Denoising with Multi-Threshold 2D Discrete Wavelet

Noise level estimation of BOTDA for optimal non-local means denoising.

Reduction in the Number of Averages Required in BOTDA Sensors Using Wavelet Denoising Techniques

Non-local means denoising based on noise level estimation for BOTDA

Enhancing Spatial Resolution for BOTDA Based on a Postprocessing Algorithm with Nonlinear Weight Coefficients

A Dual-Adaptive Denoising Algorithm for Brillouin Optical Time Domain Analysis Sensor

Improving the Spatial Resolution of a BOTDA Sensor Using Deconvolution Algorithm

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Ultrafast Resolution-Enhanced Digital Optical Frequency Comb-Based BOTDA with Pump Pulse Array Coding

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Sparse representation-based noise reduction for BOTDR monitoring signals in foundation pit anchor cables

High-Spatial-Resolution Fast BOTDA for Dynamic Strain Measurement Based on Differential Double-Pulse and Second-Order Sideband of Modulation

Accelerated Fast BOTDA Assisted by Compressed Sensing and Image Denoising

Efficient two-stage strain/temperature measurement method for BOTDA system based on Bayesian uncertainty quantification

Experimental demonstration on 2.5-m spatial resolution and 1 °c temperature uncertainty over long-distance BOTDA with combined Raman amplification and optical pulse coding

12-Km Distributed Fiber Sensor Based on Differential Pulse-Width Pair BOTDA

Slope-assisted VBOTDA based on simultaneous double-sideband modulation for pump and probe waves

Fast and High-Accuracy Temperature Extraction of BOTDR Sensor Based on Wavelet Convolutional Neural Network

Experimental Demonstration on 2.5m Spatial Resolution and 1oc Temperature Uncertainty over 74.6km BOTDA with Combined Raman Amplification and Optical Pulse Coding

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification