Abstract:Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement.

Improving the Spatial Resolution of a BOTDA Sensor Using Deconvolution Algorithm

Enhancing Ultrasonic Time-of-flight Diffraction Measurement Through an Adaptive Deconvolution Method

Improvement of Spatial Resolution for BOTDR by Iterative Subdivision Method

Ultrafast Resolution-Enhanced Digital Optical Frequency Comb-Based BOTDA with Pump Pulse Array Coding

Improving the Spatial Resolution and Signal-to-noise Ratio of BOTDR Using Double-Pulse Coding

Improvement of spatial resolution of Brillouin optical time domain reflectometer using spectral decomposition

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Fast and High-Accuracy Temperature Extraction of BOTDR Sensor Based on Wavelet Convolutional Neural Network

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

A Dual-Adaptive Denoising Algorithm for Brillouin Optical Time Domain Analysis Sensor

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Reduction in the Number of Averages Required in BOTDA Sensors Using Wavelet Denoising Techniques

Application of the joint algorithm of smooth pseudo Wigner-Ville distribution and four-parameter particle swarm optimization to BOTDR

DWI-Assisted BOTDA for Dynamic Sensing

Improving Spatial Resolution in Fiber Raman Distributed Temperature Sensor by Using Deconvolution Algorithm

Accelerated Fast BOTDA Assisted by Compressed Sensing and Image Denoising

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Reducing Trade-Off Between Spatial Resolution and Frequency Accuracy in BOTDR Using Cohen's Class Signal Processing Method

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

Enhancing the Performance of BOTDR Based on the Combination of FFT Technique and Complementary Coding.

Novel scanning method for distortion-free BOTDA measurements