Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

Time-division Multiplexing-Based BOTDA over 100km Sensing Length

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

150 Km Fast BOTDA Based on the Optical Chirp Chain Probe Wave and Brillouin Loss Scheme.

Long-range BOTDA Sensor over 50 Km Distance Employing Pre-Pumped Simplex Coding

154.4Km Botda Based on Hybrid Distributed Raman Amplifications

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

High-accuracy Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectra Measurement

BOTDA sensor utilizing digital optical frequency comb based phase spectrum measurement

100 Km Brillouin Optical Time Domain Analyzer Based on Radom Distributed Feedback Fiber Laser Pumping

Ultra-long Dual-Sideband BOTDA with Balanced Detection

Frequency Response Range Expanded Slope-Assisted BOTDA Sensor Using Randomized Sampling Technique

High-accuracy and Long-Range Brillouin Optical Time-Domain Analysis Sensor Based on the Combination of Pulse Prepump Technique and Complementary Coding

Enhanced Sensing Performance in Long Distance Brillouin Optical Time-Domain Analyzer Based on Raman Amplification: Theoretical and Experimental Investigation

Performance of Double Sideband Modulated Probe Wave in Botda Distributed Fiber Sensor

Single Measurement Brillouin Optical Time Domain Analyzer Based on Digital Optical Frequency Comb

Scanning-free Hybrid Rayleigh-Brillouin Distributed Fiber-Optic Sensing System