Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Experimental demonstration on 2.5-m spatial resolution and 1 °c temperature uncertainty over long-distance BOTDA with combined Raman amplification and optical pulse coding

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

Performance Enhancement in a Few-Mode Rayleigh-Brillouin Optical Time Domain Analysis System Using Pulse Coding and LMD Algorithm

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Ultra-Long-Distance Hybrid BOTDA/Ф-OTDR

Enhanced BOTDA Sensors Based on Brillouin Phase Recovery Using Kramers-Kronig Relation

Brillouin optical time-domain analysis enhanced by forward stimulated Brillouin scattering: proof-of-concept demonstration

Ultrafast Resolution-Enhanced Digital Optical Frequency Comb-Based BOTDA with Pump Pulse Array Coding

Efficient Demodulation of Brillouin Phase Spectra and Performance Enhancement in BOTDA Incorporating Phase Noise Elimination

Extending the Sensing Distance of a Single-end Random-access BOTDA for Dynamic Sensing

Temperature and Strain Discrimination in BOTDA Fiber Sensor by Utilizing Dispersion Compensating Fiber

100 Km Brillouin Optical Time-Domain Reflectometer Based on Unidirectionally Pumped Raman Amplification

Efficient two-stage strain/temperature measurement method for BOTDA system based on Bayesian uncertainty quantification

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

A Time-Differential BOCDA Sensor Measurement System Applied to a 1 km Long SMF Using a Semiconductor Optical Amplifier as a Pump Chopper

Simultaneous temperature and strain sensing using few-mode fiber in a single-ended BOTDA system

Breakthrough the physical barrier on spatial resolution in Raman distributed fiber sensing using chaotic correlation demodulation

Hybrid B-OTDR/Φ-OTDR for Multi-Parameter Measurement from a Single End of Fiber

Performance Enhancement for Long Distance BOTDR Sensing System Based on High Extinction Ratio Probe Pulse Generator