Abstract:Brillouin optical time-domain analysis (BOTDA) using distributed Brillouin amplification (DBA) only requires a milliwatt-level pump to achieve a sensing range beyond 100 km, which provides a powerful tool for temperature/strain sensing. However, similar to the majority of other long-range BOTDAs, the state-of-the-art reports require > 1000 times average, severely restricting the sensing speed. The blind area over tens of kilometers caused by the nonuniform Brillouin response and parasitic amplitude modulation (AM) are crucial factors affecting the signal-to-noise ratio (SNR). Here, a comprehensive performance optimization and substantial enhancement for BOTDA sensors was presented by the direct demodulation of an injection-locked dual-bandwidth probe wave. Injection locking (IL) can completely eliminate the impact of AM noise; dual-bandwidth probe enables self-adaptive pulse loss compensation, thereby intensifying the SNR flatness along the ultralong fiber, and direct probe demodulation can overcome nonlocal effects and allows ∼19.7 dB enhancement of probe input power. Therefore, using only 100 times average, ∼148.3 km sensing, and ∼5 m spatial resolution were achieved with < ∼0.8 MHz standard deviation of Brillouin frequency shift (BFS) over a broad range (∼131.7 km). The reduction in averages was more than 10 times that of the reported majority of long-range BOTDAs. Such performances were achieved without using time-consuming or post-processing techniques, such as optical pulse coding and image denoising. Because this approach is compatible with optical chirp chain technique without frequency sweeping, fast acquisition (0.3 s) was also realized, which has the potential for fast sensing at 3.3 Hz along a ∼150 km fiber.

Slope-assisted VBOTDA based on simultaneous double-sideband modulation for pump and probe waves

Slope-Assisted Botda Based on Vector Sbs and Frequency-Agile Technique for Wide-Strain-Range Dynamic Measurements

High-Spatial-Resolution Fast BOTDA for Dynamic Strain Measurement Based on Differential Double-Pulse and Second-Order Sideband of Modulation

Enhancing Strain Dynamic Range of Slope-Assisted BOTDA by Manipulating Brillouin Gain Spectrum Shape

Single-shot BOTDA based on an optical chirp chain probe wave for distributed ultrafast measurement

Strain Dynamic Range Enlargement of Slope-Assisted BOTDA by Using Brillouin Phase-Gain Ratio

High-accuracy Sweep-Free BOTDA Enabled by Simultaneous Full-Field Brillouin Spectra Measurement

Performance Analysis of Slope-Assisted Dynamic Botda Based on Brillouin Gain or Phase-Shift in Optical Fibers

Strain-induced Vibration and Temperature Sensing BOTDA System Combined Frequency Sweeping and Slope-Assisted Techniques

Distributed Vibration Measurement Based on a Coherent Multi-Slope-assisted BOTDA with a Large Dynamic Range.

Towards fast sensing along ultralong BOTDA: flatness enhancement by utilizing injection-locked dual-bandwidth probe wave

Wide-range Dynamic Strain Measurements Based on K-BOTDA and Frequency-Agile Technique

Dynamic Strain Sensing by Using Phase-Gain Ratio in Slope-Assisted Brillouin Optical Time Domain Analysis

Distributed Measurement of Dynamic Strain Based on Multi-Slope Assisted Fast BOTDA.

Distributed Dynamic Strain Measurement Based on Dual-Slope-Assisted Brillouin Optical Correlation Domain Analysis

Frequency Response Range Expanded Slope-Assisted BOTDA Sensor Using Randomized Sampling Technique

Non-Step-Scanning Rayleigh–Brillouin Distributed Fiber-Optic Sensing System Utilizing Double Sideband Modulation

Performance of Double Sideband Modulated Probe Wave in Botda Distributed Fiber Sensor

Efficient two-stage strain/temperature measurement method for BOTDA system based on Bayesian uncertainty quantification

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

An Optimization and Stabilization Algorithm of Brillouin Shifted Sidebands in BOTDA Sensors