Abstract:In this paper, simulation modeling was carried out using Sentaurus Technology Computer-Aided Design. Two types of high electron mobility transistors (HEMT), an AlGaN/GaN/AlGaN double heterojunction and AlGaN/GaN single heterojunction, were designed and compared. The breakdown characteristics and damage mechanisms of the two devices under the injection of high-power microwaves (HPM) were studied. The variation in current density and peak temperature inside the device was analyzed. The effect of Al components at different layers of the device on the breakdown of HEMTs is discussed. The effect and law of the power damage threshold versus pulse width when the device was subjected to HPM signals was verified. It was shown that the GaN HEMT was prone to thermal breakdown below the gate, near the carrier channels. A moderate increase in the Al component can effectively increased the breakdown voltage of the device. Compared with the single heterojunction, the double heterojunction HEMT devices were more sensitive to Al components. The high domain-limiting characteristics effectively inhibited the overflow of channel electrons into the buffer layer, which in turn regulated the current density inside the device and improved the temperature distribution. The leakage current was reduced and the device switching characteristics and breakdown voltage were improved. Moreover, the double heterojunction device had little effect on HPM power damage and high damage resistance. Therefore, a theoretical foundation is proposed in this paper, indicating that double heterojunction devices are more stable compared to single heterojunction devices and are more suitable for applications in aviation equipment operating in high-frequency and high-voltage environments. In addition, double heterojunction GaN devices have higher radiation resistance than SiC devices of the same generation.

Impact of E‐mode GaN HEMT with P‐type Gate on Waveform Distortion in an AirFuel Wireless Power Transfer System

Impact of E‐Mode Gallium Nitride High Electron Mobility Transistor with P‐Type Gate on Waveform Distortion in an AirFuel Wireless Power Transfer System

Mechanism of wireless power transfer system waveform distortion caused by nonideal gallium nitride transistor characteristics

Impact of Non-Ideal Waveforms on GaN Power FET in Magnetic Resonant Wireless Power Transfer System

Thermal Effect Simulation of GaN HFETs under CW and Pulsed Operation.

Electro-thermal-stress interaction of GaN HEMT breakdown induced by high power microwave pulses

Dynamic Ron Effect in GaN HEMT in a Zero-Voltage-Switching Circuit Due to Off-Resonance Operation

A GaN HEMT Integrated Power Module with Silver Sintering Processes

Adaptive Synchronization and Dead-Time Control Method for GaN-Based Full-Bridge Rectifier in MHz Wireless Power Transfer System

Derivation of the Resonance Mechanism for Wireless Power Transfer Using Class-E Amplifier

Damage Effects and Mechanisms of High-Power Microwaves on Double Heterojunction GaN HEMT

Interference effects in GaN high electron mobility transistor power amplifier induced by microwave pulses

Study of Self-Heating and High-Power Microwave Effects for Enhancement-Mode p-Gate GaN HEMT

The degradation mechanism of high power S-band AlGaN/GaN HEMTs under high temperature

A High-Efficiency Gan-Based Transmitter For Wireless Power Transfer System

Resonant Mechanism for a Long-Distance Wireless Power Transfer Using Class E PA and GaN HEMT

Progress of GaN-Based E-mode HEMTs

Analysis and Design of GaN Magnetic Resonant Wireless Power Transfer System

The ESD Behavior of Enhancement GaN HEMT Power Device with p-GaN Gate Structure

Inverse Piezoelectric and Trap Effects with Temperature Dependence in AlGaN/GaN HEMTs under Narrowband Microwave Pulses

Recent Advances in GaN‐Based Power HEMT Devices