Abstract:In this study, iron was used to modify pyrolytic activated carbon (AC) to synthesize a bifunctional catalyst (Fe/AC). It was applied to the catalytic co-pyrolysis of lignin with polypropylene (PP) for the preparation of jet fuel range hydrocarbons. Relationships between iron loading, reaction temperature, catalyst/feedstock ratio, and lignin/PP ratio were investigated in connection to the yield, component distribution, carbon number distribution, and chain structure of pyrolysis products. The results indicated that the hydrocarbons with carbon numbers in the jet fuel range dominated the products obtained from the catalytic co-pyrolysis of lignin and polypropylene. Owing to the oxytropism of Fe3 + , the selectivity of oxygenated chemicals in pyrolysis oil decreased as the Fe loading rose. Consequently, the production of hydrocarbons in the jet fuel range was increased. Furthermore, the deoxygenation and alkylation reactions of phenols to high-carbon aromatics were facilitated by Fe3 + . The cyclization and dehydrogenation reactions were promoted with the reaction temperature increased, thus enhancing the selectivity of cyclic hydrocarbons (cycloalkanes and aromatics) in the jet fuel range. However, secondary reactions were boosted with the excessive temperature, reducing the yield of hydrocarbons and the percentage of high-carbon hydrocarbons in the jet fuel range. The reduction of the proportion of oxygenated compounds was facilitated by the use of catalysts. Thus, the selectivity of hydrocarbons in the jet fuel range was improved, but the yield of high-carbon hydrocarbons would be reduced. In addition, the cleavage of PP-derived chain hydrocarbons was promoted by the hydrogen abstraction reaction of lignin-derived oxygenates during co-pyrolysis. The hydrogen transfer reaction between hydrocarbons and phenols was enhanced, it was pushed for phenols to convert to aromatics. Thus, the yield of hydrocarbons in the range of jet fuel was improved. A new approach to the efficient application of lignin with PP might be offered by the current work.

Jet fuel-range hydrocarbon production from catalytic pyrolysis of low-density polyethylene by metal-loaded activated carbon

Jet fuel range hydrocarbon production by co-pyrolysis of low density polyethylene and wheat straw over an activated carbon catalyst

Catalytic co‐pyrolysis of low‐density polyethylene (LDPE) and lignin for jet fuel range hydrocarbons over activated carbon catalyst

Tunable Production of Jet-Fuel Range Alkanes and Aromatics by Catalytic Pyrolysis of LDPE over Biomass-Derived Activated Carbons

Jet fuel range hydrocarbon generation from catalytic pyrolysis of lignin and polypropylene with iron-modified activated carbon

Synthesis of Jet Fuel Constituents: N-Alkanes and Iso-Alkanes from Waste Polyethylene Via Bifunctional Metal-Acid Catalysis under Mild Conditions

Jet Fuel and Hydrogen Produced from Waste Plastics Catalytic Pyrolysis with Activated Carbon and MgO

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

Improving bio-oil quality from low-density polyethylene pyrolysis: Effects of varying activation and pyrolysis parameters

Renewable jet-fuel range hydrocarbons production from co-pyrolysis of lignin and soapstock with the activated carbon catalyst

Co-hydropyrolysis of Pine and HDPE over Bimetallic Catalysts: Efficient BTEX Production and Process Mechanism Analysis

A novel production of phase-divided jet-fuel-range hydrocarbons and phenol-enriched chemicals from catalytic co-pyrolysis of lignocellulosic biomass with low-density polyethylene over carbon catalysts

Counteractive Catalytic Effects of FeNi- Versus Fe- and Ni- in Plastic Pyrolysis for Advanced-Quality Jet Fuel Production

Production of Renewable Jet Fuel and Gasoline Range Hydrocarbons from Catalytic Pyrolysis of Soapstock over Corn Cob-Derived Activated Carbons

Polyethylene upcycling to fuels: Narrowing the carbon number distribution in n-alkanes by tandem hydropyrolysis/hydrocracking

The effects of pore structures and functional groups on the catalytic performance of activated carbon catalysts for the co-pyrolysis of biomass and plastic into aromatics and hydrogen-rich syngas

Jet Fuel Range Hydrocarbon Production from Propanal: Mechanistic Insights into Active Site Requirement of a Dual-Bed Catalyst

Thermo-catalytic conversion of waste plastics into surrogate fuels over spherical activated carbon of long-life durability

Comprehensive study of alkali lignin pyrolysis catalyzed by composite metal-modified molecular sieves for the preparation of hydrocarbon liquid fuels

Polypropylene Pyrolysis and Steam Reforming over Fe-based Catalyst Supported on Activated Carbon for the Production of Hydrogen-Rich Syngas

Sustainable production of aromatics via catalytic pyrolysis of polyolefins towards the carbon cycle for plastics