Abstract:In this study, iron was used to modify pyrolytic activated carbon (AC) to synthesize a bifunctional catalyst (Fe/AC). It was applied to the catalytic co-pyrolysis of lignin with polypropylene (PP) for the preparation of jet fuel range hydrocarbons. Relationships between iron loading, reaction temperature, catalyst/feedstock ratio, and lignin/PP ratio were investigated in connection to the yield, component distribution, carbon number distribution, and chain structure of pyrolysis products. The results indicated that the hydrocarbons with carbon numbers in the jet fuel range dominated the products obtained from the catalytic co-pyrolysis of lignin and polypropylene. Owing to the oxytropism of Fe3 + , the selectivity of oxygenated chemicals in pyrolysis oil decreased as the Fe loading rose. Consequently, the production of hydrocarbons in the jet fuel range was increased. Furthermore, the deoxygenation and alkylation reactions of phenols to high-carbon aromatics were facilitated by Fe3 + . The cyclization and dehydrogenation reactions were promoted with the reaction temperature increased, thus enhancing the selectivity of cyclic hydrocarbons (cycloalkanes and aromatics) in the jet fuel range. However, secondary reactions were boosted with the excessive temperature, reducing the yield of hydrocarbons and the percentage of high-carbon hydrocarbons in the jet fuel range. The reduction of the proportion of oxygenated compounds was facilitated by the use of catalysts. Thus, the selectivity of hydrocarbons in the jet fuel range was improved, but the yield of high-carbon hydrocarbons would be reduced. In addition, the cleavage of PP-derived chain hydrocarbons was promoted by the hydrogen abstraction reaction of lignin-derived oxygenates during co-pyrolysis. The hydrogen transfer reaction between hydrocarbons and phenols was enhanced, it was pushed for phenols to convert to aromatics. Thus, the yield of hydrocarbons in the range of jet fuel was improved. A new approach to the efficient application of lignin with PP might be offered by the current work.

Polypropylene Pyrolysis and Steam Reforming over Fe-based Catalyst Supported on Activated Carbon for the Production of Hydrogen-Rich Syngas

Hydrogen-rich syngas production by catalytic cracking of polypropylene over activated carbon based monometallic and bimetallic Fe/Ni catalysts

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Catalytic reforming of polypropylene to produce hydrogen: Influence of support characteristics and active metal type in catalyst

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Co-pyrolysis–catalytic steam reforming of cellulose/lignin with polyethylene/polystyrene for the production of hydrogen

Preparation of hydrogen-rich gas by catalytic pyrolysis of straw-plastic mixture with nickel-based honeycomb cinder

Hydrogen Production by Three-Stage (i) Pyrolysis, (ii) Catalytic Steam Reforming, and (iii) Water Gas Shift Processing of Waste Plastic

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Jet fuel range hydrocarbon generation from catalytic pyrolysis of lignin and polypropylene with iron-modified activated carbon

Hydrogen Production by Pyrolysis–Nonthermal Plasma/Catalytic Reforming of Waste Plastic over Different Catalyst Support Materials

In situ synthesis of highly dispersed Fe/C catalysts with pomelo peel as carbon source in CO 2 hydrogenation to light olefins

Hydrogen Production by Steam Reforming of Pyrolysis Oil from Waste Plastic over 3 wt.% Ni/Ce-Zr-Mg/Al2O3 Catalyst

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Hydrogen/Syngas Production from Different Types of Waste Plastics Using a Sacrificial Tire Char Catalyst via Pyrolysis–Catalytic Steam Reforming

Hydrogenolysis of Polypropylene and Mixed Polyolefin Plastic Waste over Ru/C to Produce Liquid Alkanes

Catalytic Reforming of the Aqueous Phase Derived from Diluted Hydrogen Peroxide Oxidation of Waste Polyethylene for Hydrogen Production

Coking-resistant NiO@CeO 2 catalysts derived from Ce-MOF for enhanced hydrogen production from plastics

Palladium catalyzes hydrogen production from formic acid: significant impact of support polypyrrole

Bimetallic AgPd Nanoparticles Immobilized on Amine‐Functionalized SBA‐15 As Efficient Catalysts for Hydrogen Generation from Formic Acid