Abstract:Highlights • A cheap and efficient Fe catalysts were synthesized with extremely simple method. • The as-synthesized catalysts show excellent selectivity for H 2 . • H 2 yield is up to 38.73 mmol/g PP without water and 112.71 mmol/g PP with water. • Various forms (nanotubes and nanospheres) of graphite carbon were found. • Adding water can increases hydrogen production and prevents carbon buildup. The purpose of this study is to explore a method for the high-yield production of hydrogen by pyrolysis and steam reforming of polymer plastics. The developed Fe-based catalyst supported on activated carbon was applied to reactions with polypropylene for hydrogen production. The effects of iron loading (%) in the catalyst, the total catalyst amount, and the water content in the reaction atmosphere on the performance of hydrogen and gas production were investigated. Under the optimal conditions, the hydrogen yield without water added reached 38.73 mmol/g PP , and this yield was significantly improved by adding water into the reaction atmosphere. By optimizing the amount of water added, the hydrogen yield reached 112.71 mmol/g PP . The surface morphology and structural components of the fresh and used catalysts were characterized, and the morphology and quantity of carbon deposition on the catalyst were analysed. The catalytic stability of the 15Fe/AC catalyst was determined by repeating the test 10 times under the optimal reaction conditions. As the reaction time increased, the selectivity of the catalyst for hydrogen decreased and that for hydrocarbons increased. Moreover, the experimental method used in this study had excellent hydrogen production capacity. Thus, this study provided a novel method for the high-efficiency production of hydrogen by pyrolysis and steam reforming of polymer plastics. Graphical abstract Download : Download high-res image (144KB) Download : Download full-size image

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Hydrogen-rich syngas production by catalytic cracking of polypropylene over activated carbon based monometallic and bimetallic Fe/Ni catalysts

Polypropylene Pyrolysis and Steam Reforming over Fe-based Catalyst Supported on Activated Carbon for the Production of Hydrogen-Rich Syngas

Catalytic reforming of polypropylene to produce hydrogen: Influence of support characteristics and active metal type in catalyst

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Hydrogen Production by Steam Reforming of Pyrolysis Oil from Waste Plastic over 3 wt.% Ni/Ce-Zr-Mg/Al2O3 Catalyst

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Hydrogen Production by Pyrolysis–Nonthermal Plasma/Catalytic Reforming of Waste Plastic over Different Catalyst Support Materials

A high-quality hydrogen production strategy from waste plastics through microwave-assisted reactions with heterogeneous bimetallic iron/nickel/cerium catalysts

Preparation of hydrogen-rich gas by catalytic pyrolysis of straw-plastic mixture with nickel-based honeycomb cinder

Low-temperature hydrogen production from waste polyethylene by nonthermal plasma (NTP)-assisted catalytic pyrolysis using NiCeOx/β catalyst

Pyrolysis-plasma/catalytic reforming of post-consumer waste plastics for hydrogen production

From plastic waste pyrolysis to Fuel: Impact of process parameters and material selection on hydrogen production

Hydrogen and aromatics recovery through plasma-catalytic pyrolysis of waste polypropylene

Hydrogen-free Upcycling of Polyethylene Waste to Methylated Aromatics over Ni/ZSM-5 under Mild Conditions.

Catalytic pyrolysis of film waste over Co/Ni pillared montmorillonites towards H2 production

Formation mechanism of hydrogen production from catalytic pyrolysis of waste tires: A ReaxFF molecular dynamics and experimental study

Coking-resistant NiO@CeO 2 catalysts derived from Ce-MOF for enhanced hydrogen production from plastics

Hydrogenolysis of Polypropylene and Mixed Polyolefin Plastic Waste over Ru/C to Produce Liquid Alkanes

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity