Abstract:Pyrolysis is one of the most promising methods to treat waste tires. In this paper, a waste rubber model is established, and the pyrolysis process of rubber polymer at 1500–3000 k is investigated by molecular dynamics simulation. The whole pyrolysis process, the pyrolysis behavior of each component and the formation of S and N compounds are studied in detail. The results show that natural rubber (NR), styrene butadiene rubber (SBR) and nitrile rubber (NBR) are in the leading position in the pyrolysis process. When the carbon chain of rubber macromolecule breaks, many C and H atoms escape from it and combine with each other to form CH 3 , H radicals, CH 4 , H 2 , etc.; The pyrolysis products of waste rubber mainly include hydrocarbons CH 4 , C 2 H 2 , C 4 H 2 , C 5 H 4 , sulfur compounds H 2 S, CH 3 SH, HS, nitrogen compounds NH 3 , HCN and small molecule substances H 2 ; The increase of temperature can promote the pyrolysis of rubber, promote the carbon chain fracture, and promote the formation of more H 2 S; For H 2 S formation, HS is an important intermediate. HS compounds are mainly formed through the gradual pyrolysis of thiophene and polysulfide rubber. HS is stabilized by the transfer of H atoms. For nitrogenous pollutants, HCN is an important component in the pyrolysis. With the increase of temperature, the amount of HCN increases because of the decomposition of complex nitrogen compounds. The amount of oxygen has little effect on sulfide and nitride. At high temperature, nitrogen will also participate in the pyrolysis reaction. This paper reveals the pyrolysis behavior of waste rubber and the formation mechanism of S and N pollutants through simulation research, which provides a reference for the further development of waste tire rubber pyrolysis recovery.

Formation mechanism of hydrogen production from catalytic pyrolysis of waste tires: A ReaxFF molecular dynamics and experimental study

Degradation of Rubber Waste into Hydrogen Enriched Syngas Via Microwave-Induced Catalytic Pyrolysis

A Novelty Catalytic Reforming of Tire Pyrolysis Oil for Hydrogen-Rich Syngas

Molecular Dynamics Simulation of Waste Tire Pyrolysis at High Temperature

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Waste derived ash as catalysts for the pyrolysis-catalytic steam reforming of waste plastics for hydrogen-rich syngas production

Hydrogen/Syngas Production from Different Types of Waste Plastics Using a Sacrificial Tire Char Catalyst via Pyrolysis–Catalytic Steam Reforming

Catalytic reforming of polypropylene to produce hydrogen: Influence of support characteristics and active metal type in catalyst

Study on pyrolysis characteristics, kinetics and thermodynamics of waste tires catalytic pyrolysis with low-cost catalysts

Sustainable valorization of waste tires: Selective hydrotreating for renewable p-cymene production

Catalytic Hydrogenolysis of Plastic to Liquid Hydrocarbons over a Nickel-Based Catalyst

Thermal Behavior, Reaction Pathways and Kinetic Implications of Using a Ni/SiO2 Catalyst for Waste Tire Pyrolysis

Polyethylene Hydrogenolysis over Bimetallic Catalyst with Suppression of Methane Formation

Co-pyrolysis of Corn Stover and Waste Tire: Pyrolysis Behavior and Kinetic Study Based on Fraser-Suzuki Deconvolution Procedure

Kinetic analysis of waste tire pyrolysis with metal oxide and zeolitic catalysts

Pyrolysis of biomass Tar model compound with various Ni-based catalysts: Influence of promoters characteristics on hydrogen-rich gas formation

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Hydrogen Production by Steam Reforming of Pyrolysis Oil from Waste Plastic over 3 wt.% Ni/Ce-Zr-Mg/Al2O3 Catalyst

Formation Behavior of PAHs During Pyrolysis of Waste Tires.

BTEX recovery from waste rubbers by catalytic pyrolysis over Zn loaded tire derived char

Production of low-sulfur fuels from catalytic pyrolysis of waste tires using formulated red mud catalyst