Abstract:La-Fe modified Si-MCM-41 (La-Fe/Si-MCM-41) catalysts were prepared by the wet impregnation method and used in catalytic cracking of soybean oil (CCS) for biofuel production. The catalysts were characterized by BET, XRD, XPS, Py-FTIR and CO2-TPD. The results showed that the aromatics content increased with the increase in B/L value, while the content of oxygenated compounds decreased, indicating that Bronsted acid sites were the major active sites for deoxygenation and aromatization reactions. Compared with Si-MCM-41, the Bronsted acidity of LFM-6 sharply decreased from 22.49 to 5.86 mu mol g(-1). Accordingly, the aromatics content was re- duced from 37.51 wt.% to 14.52 wt.% which was lower than the limitation (15 wt.%) according to the global environmental legislation. However, for the LFM-6 catalyst, the excessive loss of Bronsted acid sites and sharp decrease in BET surface area and pore volume led to the decrease in deoxygenation. As a result, the fatty acids content increased from 2.71 wt.% to 16.67 wt.% and the acid value reached 35.20 mgKOH g(-1). When the La-Fe loading increased to 15 wt.%, part of fatty acids were converted into ketones by the active sites on Fe2O3/La2O3 and strong Lewis acid sites on catalysts. Besides, the new weak Lewis acid and basic sites on Fe2O3/La2O3 exhibited the synergistic effect on promoting the generation of alkenes. The CaO/LFM-6 composite catalysts prepared by the mechanical mixing of LFM-6 and Ca0 were used in CCS to reduce the acid value of biofuel. LFM6-C-3 was proved to be an effective catalyst for CCS to produce biofuel with low aromatics (12.31 wt.%) and fatty acids (2.76 wt.%) content.

Impact of Pt/Al-MCM-41 Catalyst Metal/Acid Ratio in Hydrocracking of Bio-Alkanes for Bio-Jet Fuel Production

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Co-hydrotreating of Algae and Used Engine Oil for the Direct Production of Gasoline and Diesel Fuels or Blending Components

Hydrodeoxygenation and Hydrocracking of Microalgae Biodiesel to Produce Jet Biofuel over H3PW12O40-Ni/hierarchical Mesoporous Zeolite Y Catalyst

Effect of La-Fe/Si-MCM-41 Catalysts and CaO Additive on Catalytic Cracking of Soybean Oil for Biofuel with Low Aromatics

Optimizing Catalysis Conditions to Decrease Aromatic Hydrocarbons and Increase Alkanes for Improving Jet Biofuel Quality.

Unraveling enhanced activity and coke resistance of Pt-based catalyst in bio-aviation fuel refining

Bio-fuel production from hydroconversion of hexadecane over Pt/SAPO-11 catalysts

Ni-BTC Metal-Organic Framework Loaded on MCM-41 to Promote Hydrodeoxygenation and Hydrocracking in Jet Biofuel Production

Hydrocracking of Palm Oil to Jet Biofuel over Different Zeolites

Jet Fuel Range Hydrocarbons Production Through Competitive Pathways of Hydrocracking and Isomerization over HPW-Ni/MCM-41 Catalyst

The gradient fabrication and optimization of metal-acid bifunctional catalysts for the hydrogenation of n-C16 to produce bio-jet fuel component

Maximizing jet fuel production from n -hexadecane hydrocracking over Pt-supported Y catalysts: Importance of ideal hydrocracking characteristics

Highly efficient catalytic pyrolysis of biomass vapors upgraded into jet fuel range hydrocarbon-rich bio-oil over a bimetallic Pt–Ni/γ-Al2O3 catalyst

Cascade hydrogenation of n-C16 to produce jet fuel over tandem catalysts of modified ZSM-22

Optimization of kerosene from a one-step catalytic hydrogenation of castor oil over Pt-La/SAPO-11 by response surface methodology

Jet Range Hydrocarbons Converted from Microalgal Biodiesel over Mesoporous Zeolite-Based Catalysts

The Selective Production of Jet Fuel Range Alkanes Via the Catalytic Upgrading of Palmitic Acid over Co/HMCM-49 Catalysts

Conversion of Palmitic Acid to Jet Fuel Components over Mo/H-ZSM-22 Bi-Functional Catalysts with High Carbon Reservation

Hydrodeoxygenation and hydrocracking to produce jet biofuel catalyzed by mesoporous zeolite desilicated with NaOH treatment

Compositional dependence of Co- and Mo-supported beta zeolite for selective one-step hydrotreatment of methyl palmitate to produce bio jet fuel range hydrocarbons