Abstract:Carbon nanotubes reinforced aluminum matrix nanocomposites were fabricated by friction stir processing. Raman spectroscopy, scanning electron microscope, transmission electron microscopy and tensile tests were used to characterize microstructures and mechanical properties of the nanocomposites. Effects of energy input during friction stir processing on microstructures and mechanical properties of the nanocomposites were investigated. It was found that the grain of aluminum matrix in the nanocomposites was coarsened slightly with the increase of energy input. Microstructure analysis showed that carbon nanotubes were successfully incorporated into aluminum matrix by friction stir processing and well bonded interfaces between the carbon nanotubes and aluminum matrix were formed. However, the carbon nanotubes dispersion and mechanical properties of the nanocomposites fabricated with different energy inputs were quite different, in which better carbon nanotubes dispersion and higher tensile strength could be obtained by applying higher energy input during the fabrication process. By applying the highest energy input, the tensile strength of the nanocomposite was 53.8% higher than that of the unreinforced aluminum. Meanwhile, the elongation of the nanocomposite was 31.2%, which showed an excellent ductility. The strengthening mechanisms were the synergy of Orowan looping, load transfer and grain refining. The present findings may provide the guidance on the optimization of the processing parameters during friction stir processing for fabricating the high performance aluminum/CNTs nanocomposites.

Plasticity Improvement of CNTs/Mg Nanocomposite Materials Processed by Combining Friction Stir Processing and Ultrasonic-Assisted Extrusion

Fabrication and Mechanical Properties of CNTs/Mg Composites Prepared by Combining Friction Stir Processing and Ultrasonic Assisted Extrusion

Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

On the role of carbon nanotubes addition in carbon fiber-reinforced magnesium matrix composites

In Situ Synthesized Nano-Al4c3 Reinforced Aluminum Matrix Composites Via Friction Stir Processing

Fabrication of metal matrix composites via friction stir processing

A Novel Melt Processing for Mg Matrix Composites Reinforced by Multiwalled Carbon Nanotubes

Enhanced ductility by Mg addition in the CNT/Al-Cu composites via flake powder metallurgy

A Novel Method to Fabricate CNT/Mg–6Zn Composites with High Strengthening Efficiency

Enhancement of thermal–mechanical performances via a selective CNTs configuration in laminated CNTs/AZ31B composite

Strengthening and toughening mechanisms of CNTs/Mg–Al composites prepared via powder metallurgy combined with hot extrusion

Developing Fittingly Comprehensive Performance Carbon Nanotube/Mg-6Zn Sheets with Substantial Enhancement in Formability

Microstructure and Mechanical Properties of Magnesium Matrix Composite Reinforced with Carbon Nanotubes by Ultrasonic Vibration

Microstructure and properties of carbon nanotubes-reinforced magnesium matrix composites fabricated via novel in situ synthesis process

Optimization of the mechanical properties of CNTs/Cu composite by regulating the size of interfacial TiC

Understanding the Influencing Mechanism of CNTs on the Microstructure and Mechanical Properties of Semi-solid Stir Casting Al-Cu-Mg Alloys

Mechanical properties and fabrication of carbon nanotubes reinforced AZ91D magnesium matrix nanocomposites

Microstructure and mechanical properties of carbon nano-onions reinforced Mg-based metal matrix composite prepared by friction-stir processing

Improvement of interfacial interaction and mechanical properties in aluminum matrix composites reinforced with Cu-coated carbon nanotubes

Effects of Energy Input During Friction Stir Processing on Microstructures and Mechanical Properties of Aluminum/carbon Nanotubes Nanocomposites