Abstract:Due to the barely resonant earthed system used in the transmission line, it is more challenging to identify faults at a 66 kV voltage level because of insufficient fault identification techniques. In this paper, a 66 kV transmission line fault identification method based on a fault characteristic matrix and an improved particle swarm optimization (IPSO)-wavelet neural network (WNN) is proposed to address the difficulties in extracting and detecting characteristic parameters. The maximum matrix of the dbN wavelet was used to determine its decomposition scale and construct the fault characteristic matrix based on the energy values of frequency bands. The decomposition scale of the dbN wavelet was determined by the modulus maximum matrix to ensure the integrity of fault information. The fault feature matrix was then constructed based on the energy values of frequency bands and the fault feature was accurately extracted. In this research, aiming at the problems such as slow convergence speed and a tendency to fall into local minima, the WNN algorithm is enhanced with the IPSO algorithm. This significantly increased the convergence speed of the identification model and its ability to discover the global optimal solution. The simulation results demonstrate that this method can effectively and accurately identify the fault type with high identification accuracy, quick identification, and robust adaptability. Under challenging working conditions, it is capable of accurately identifying the fault type of 66 kV transmission lines.

Fault Identification in T-connection Transmission Lines Based on Probabilistic Neural Network and Wave Impedance Angle

Fault Locating Algorithm for T-type Transmission Lines with Asynchronous Sampling

Fault Location Algorithm for HV Transmission Lines Immune to Saturation of Current Transformers

Fault Model and Travelling Wave Matching Based Single Terminal Fault Location Algorithm for T-Connection Transmission Line: A Yunnan Power Grid Study

New Fault Location Method for HV T-connection. Transmission Lines

A Distributed Fault Location Method For T-Connection Transmission Line

Single-Ended Fault Location for Hybrid Transmission Line Using Embedded Artificial Intelligence

Fault Identification Technology of 66 kV Transmission Lines Based on Fault Feature Matrix and IPSO-WNN

Sequential Data-Based Fault Location for Single-Line-to-Ground Fault in a T-Connection Power Line

Fault Location Method in Power Network by Applying Accurate Information of Arrival Time Differences of Modal Traveling Waves

Parameter Identification Algorithm for Fault Location Based on Distributed Transmission Line Model

Transmission Line Fault Diagnosis Based on Wavelet Packet Analysis and Convolutional Neural Network.

Fault Location Algorithm for Non-Homogeneous Transmission Lines Considering Line Asymmetry

Long Transmission Lines Fault Location Based on Parameter Identification Using One-Terminal Data

Fault‐cause Identification Method Based on Adaptive Deep Belief Network and Time–frequency Characteristics of Travelling Wave

An Improved Natural Frequency Based Line Fault Location Method on Untransposed Lines

Time Domain Fault Location Method Based on Transmission Line Parameter Identification Using Two Terminals Data

A Novel Fault Identification Method for HVDC Transmission Line Based on Stransform Multi-Scale Area

Transmission Line Pilot Protection Based on Frequency-domain Model Identification of Distributed Parameter

Transmission Line Fault Location Based on Improved Algorithm of Electromagnetic Time Reversal

Non-contact Fault Location and Identification Method for Same-Tower Multi-Circuit Transmission Lines