Abstract:Ni-rich layered oxides are potential candidates for cathodes of high energy density, and meanwhile low cost and environmental benign by reducing the usage of Cobalt. To develop Ni-rich layered oxides as durable high-energy cathodes in lithium-ion batteries, construction of a solid solution in the transition metal layers by adding a second or even third cation into the LiNiO2 framework is becoming an effective strategy for stabilizing the structure and/or tailoring electrochemical properties. It has been reported that electrochemical performance is greatly affected by even a small amount of Ni-ion mixture in the Li-ion layers, and this kind of structural disorder can be controlled by improved synthetic protocols. In order to improve the electrochemical properties of the material it is critical to understand its structure chemistry during the high temperature synthesis process. Herein, we report on developing new high-capacity Ni-rich cathodes with enhanced cyclability via tuning the stoichiometry and structure of the materials. Systemic investigation is made to the phase evolution of Ni-rich LiNi1-x-yMnxCoyO2 (x+y ≤ 0.3) under different annealing temperatures by in situ synchrotron X-ray diffraction (XRD) measurements, combined with neutron diffraction and transmission electron microscopy/spectroscopy. Structural characterization indicates intriguing phase transitions during the formation of LiNi1-x-yMnxCoyO2 in the high temperature annealing process, which are closely related to cation mixture. Structure related order parameters can be used to describe these phase transitions and to determine all of the phases in such a complicated Ni-Mn-Co composition space, which, however, is challenging due to their strong dependence on the Mn and Co stoichiometry (i.e. x and y values). The in-situ XRD studies gain us access to the phase diagram in the Ni-rich region of the Ni-Mn-Co space (x+y ≤ 0.3), thereby enabling the design of synthetic protocols for preparing high-capacity LiNi1-x-yMnxCoyO2 cathodes with stabilized structure and reasonable cycling stability. The work is supported by DOE-EERE under the Advanced Battery Materials Research (BMR) program, under Contract No. DE-SC0012704.

<i>In situ</i> synthesis of a nickel concentration gradient structure of Ni-rich LiNi<sub>0.8</sub>Co<sub>0.15</sub>Al<sub>0.05</sub>O<sub>2</sub> with promising superior electrochemical properties at high cut-off voltage

In situ synthesis of a nickel concentration gradient structure of Ni-rich LiNi0.8Co0.15Al0.05O2 with promising superior electrochemical properties at high cut-off voltage

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Preparation of Long-term Cycling Stable Ni-Rich Concentration–Gradient NCMA Cathode Materials for Li-Ion Batteries

In Situ X-ray Diffraction and Thermal Analysis of LiNi0.8Co0.15Al0.05O2 Synthesized Via Co-Precipitation Method

In Situ Probing and Synthetic Control of Cationic Ordering in Ni‐Rich Layered Oxide Cathodes

In Situ Tracking of the Structure Chemistry During the Synthesis of Ni-Rich Layered Oxides As High-Energy Cathodes for Lithium-Ion Batteries

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

In-situ electrolytic synthesis and superior lithium storage capability of Ni–NiO/C nanocomposite by sacrificial nickel anode in molten carbonates

Intrinsic Role of Cationic Substitution in Tuning Li/Ni Mixing in High-Ni Layered Oxides

Synthesis of Full Concentration Gradient Cathode Studied by High Energy X-ray Diffraction

Synthesis and Characterization of LiNi1/3Mn1/3Co1/3O2 by Wet-Chemical Method

Enhanced compacting density and cycling performance of Ni-riched electrode via building mono dispersed micron scaled morphology

Slug-flow synthesis of NCMA: Effect of substitution of cobalt with aluminum on the electrochemical performance of Ni-rich cathode for lithium-ion battery

One-Step Synthesis of Stoichiometric LiNi 0.80 Co 0.15 Al 0.05 O 2 Precursor in Acidic Environment and Its Facile Growth into Single Crystals at Low Temperatures for Li-Ion Batteries

Highly‐Dispersed Submicrometer Single‐Crystal Nickel‐Rich Layered Cathode: Spray Synthesis and Accelerated Lithium‐Ion Transport

Surface Reconstruction of Ni‐Rich Layered Cathodes: in Situ Doping Versus Ex Situ Doping

Enhancing the interfacial stability of LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode materials by a surface-concentration gradient strategy

Synthesis of Single Crystal LiNi 0.92 Co 0.06 Mn 0.01 Al 0.01 O 2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries