Abstract:Nickel‐rich LiNi1−x−yCoxMnyO2 (NCM, 1−x−y ≥ 0.6) is known as a promising cathode material for lithium‐ion batteries since its superiority of high voltage and large capacity. However, polycrystalline Ni‐rich NCMs suffer from poor cycle stability, limiting its further application. Herein, single crystal and polycrystalline LiNi0.84Co0.07Mn0.09O2 cathode materials are compared to figure out the relation of the morphology and the electrochemical storage performance. According to the Li+ diffusion coefficient, the lower capacity of single crystal samples is mainly ascribed to the limited Li+ diffusion in the large bulk. In situ XRD illustrates that the polycrystalline and single crystal NCMs show a virtually identical manner and magnitude in lattice contraction and expansion during cycling. Also, the electrochemically active surface area (ECSA) measurement is employed in lithium‐ion battery study for the first time, and these two cathodes show huge discrepancy in the ECSA after the initial cycle. These results suggest that the single crystal sample exhibits reduced cracking, surface side reaction, and Ni/Li mixing but suffers the lower Li+ diffusion kinetics. This work offers a view of how the morphology of Ni‐rich NCM effects the electrochemical performance, which is instructive for developing a promising strategy to achieve good rate performance and excellent cycling stability. A comprehensive investigation is conducted to figure out the inherent nature of the polycrystalline and single crystal Ni‐rich NCMs in course of their electrochemical behavior and battery failure mechanisms. The result shows that the intimately agglomerated primary particles render polycrystalline sample a larger electrochemically active surface area but a significantly increased cracking and surface side reaction.

Probing Li-Ni Cation Disorder in Li1−xNi1+x−yAlyO2 Cathode Materials by Neutron Diffraction

Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation

Synthesis of LiNiO2 cathode materials with homogeneous Al doping at the atomic level

Study of Average and Local Structures of Variedly Ordered LiNi0.5Mn1.5O4 by Neutron Diffraction

Probing the Nature of Li+/Ni2+ Disorder on the Structure and Electrochemical Performance in Ni-Based Layered Oxide Cathodes

Investigation on Performance of Li(Ni0.5Co0.2Mn0.3)1−xTixO2 Cathode Materials for Lithium-Ion Battery

Al Substitution Induced Differences in Materials Structure and Electrochemical Performance of Ni-Rich Layered Cathodes for Lithium-Ion Batteries

In Situ X-ray Diffraction and Thermal Analysis of LiNi0.8Co0.15Al0.05O2 Synthesized Via Co-Precipitation Method

Revealing the disrupted Li/vacancy structure in Co, Mg, and Al co-doped ultra-high Ni-rich cathodes

A study of the structure–activity relationship of the electrochemical performance and Li/Ni mixing of lithium-rich materials by neutron diffraction

Effects of Nb substitution on structure and electrochemical properties of LiNi0.7Mn0.3O2 cathode materials

Study of the Lithium/nickel Ions Exchange in the Layered LiNi0.42Mn0.42Co0.16O2 Cathode Material for Lithium Ion Batteries: Experimental and First-Principles Calculations

Influence of Al doping on the structure and electrochemical performance of the Co-free LiNi 0.8 Mn 0.2 O 2 cathode material

Unraveling the Correlation between the Synthesis Time and Electrochemical Performance of Transition Metal Layered Oxides by In Situ Neutron Powder Diffraction

Improving Structure and Electrochemical Performance of Single-Crystal Ni-Rich Cathodes by Aluminium Doping

Co‐doping of Al3+ and Ti4+ and electrochemical properties of LiNiO2 cathode materials for lithium‐ion batteries

Probing the Structural Transition Kinetics and Charge Compensation of the P2-Na0.78Al0.05Ni0.33Mn0.60O2 Cathode for Sodium Ion Batteries.

LiNbO3 Coating and F- Doping Stabilize the Crystal Structure and Ameliorate the Interface of LiNi0.88Co0.06Mn0.03Al0.03O2 to Improve the Electrochemical Properties and Safety Capability

A Comparative Investigation of Single Crystal and Polycrystalline Ni‐Rich NCMs as Cathodes for Lithium‐Ion Batteries

Structural and Electrochemical Characteristics of Co and Al Co-Doped Lithium Nickelate Cathode Materials for Lithium-Ion Batteries

Ab Initio Study on Surface Segregation and Anisotropy of Ni-Rich LiNi 1-2y Co y Mn y O 2 (NCM) (y ≤ 0.1) Cathodes.