Abstract:Objective: In our previous publication, a core-structured field effect transistor (CoreFET) device shows field effect transistor (FET) behavior. In this work, we investigated factors such as the thickness of the film and the channel on the conductivity of the device in order to optimize the geometry to provide guidance on the fabrication of the device with the best performance. Methods: This study uses Silvaco ATLAS numerical simulation software to investigate the performance of CoreFET. The effects of the thickness of the dielectric layer, SiO2, and the distance between the drain and source (channel length) on the conductivity of the semi-conductor indium gallium zinc oxide (IGZO) have been studied. The flat FET models with the same parameters were used for comparison. Results: Our simulation results demonstrate a directed correlation between the optimized conductivity of the device and the thickness of the dielectric material, as well as the length of the channel. Enhanced sensitivity is achievable by employing a thinner dielectric layer and a narrower channel. Conclusion: According to the results, the device can achieve better performance by optimizing the thickness of the insulator and the gap distance between drain and source electrodes. The remarkable similarity between them indicates that the FET effect remained largely unaffected by variations in FET shape. This observation suggests a consistent outcome across FETs, reinforcing the notion that CoreFET exhibits comparable results as those of film FETs. This finding significantly broadens the scope of CoreFET applications.

Wire-Based Core Field Effect Transistor (Corefet)

Three-dimensional Modeling of Core-structured Field Effect Transistor

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Locally Thinned, Core-Shell Nanowire-Integrated Multi-gate MoS 2 Transistors for Active Control of Extendable Logic

Research progress on core-shell nanowire FETs

Enhancement-Mode Nanowire (nanobelt) Field-Effect-Transistors with Schottky-Contact Source and Drain Electrodes

Metal-Gated Junctionless Nanowire Transistors

Oppositely-Doped Core-Shell Junctionless Nanowire FET: Design and Investigation

Fabrication and Electrical Property of Individual ZnO Nanowire Based Mesfet

An Organic/Si Nanowire Hybrid Field Configurable Transistor

Locally Thinned, Core-Shell Nanowire-Integrated Multi-gate MoS2 Transistors for Active Control of Extendable Logic

2D Negative Capacitance Field-Effect Transistor with Organic Ferroelectrics

Piezotronic and Piezo-Phototronic Effects-Enhanced Core–Shell Structure-Based Nanowire Field-Effect Transistors

Carbon Nanotube Multi-Channeled Field-Effect Transistors.

An oxide/silicon core/shell nanowire FET

Engineering Field Effect Transistors with 2D Semiconducting Channels: Status and Prospects

Electrospun P-Type Cuo Nanofibers for Low-Voltage Field-Effect Transistors

Carbon Nanotube Electronics: Recent Advances

Functionalized Metallic Single-Walled Carbon Nanotubes as a High-Performance Single-Molecule Organic Field Effect Transistor: An ab Initio Study

A nanogapped hysteresis-free field-effect transistor

Topological Insulator Bi2se3 Nanowire High Performance Field-Effect Transistors