Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Optical Microfiber-Based Photonic Crystal Cavity

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Photonic Crystal Cavities in Microfibers with Modest Finesse and Wavelength Scale Mode Volume

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Demonstration of Broad Photonic Crystal Stop Band in a Freely-Suspended Microfiber Perforated by an Array of Rectangular Holes.

High-Q Photonic Crystal Microcavities

Femtosecond Laser Micro-Fabrication for Tailoring Photonic Crystals in Resins and Silica

Design of Photonic Crystal Micro-mirrors in Ring Resonant Cavity

High-Q Photonic Crystal Nanobeam Cavities on Silicon

Luminescent Photonic Crystal Cavities for Fiber-Optic Sensors, Coupled Dissimilar Cavities and Optofluidics

Fabrication and Resonance Characteristic Analysis of Spheroid Calcium Fluoride Millimeter Crystalline Microcavity

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Ultrahigh reflectivity photonic crystal membranes with optimal geometry

Design and Fabrication of High-Quality Two-Dimensional Silicon-Based Photonic Crystal Optical Cavity with Integrated Waveguides

Fabrication of Optical Nanofibre-Based Cavities using Focussed Ion-Beam Milling -- A Review

Optical nanofiber-based cavity induced by periodic air-nanohole arrays

Two-Dimensional Silicon Photonic Crystal Slab Devices

Fabrication Of 1d Photonic Crystal On A Single Erbium Chloride Silicate Nanowire And Microcavity Laser Design

2-Photon Microfabrication of Log-Pile Photonic Crystal and Theoretical Analysis on Its Characters

Photonic Crystal Cavities and Integrated Optical Devices