Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Photonic Crystal Cavities in Microfibers with Modest Finesse and Wavelength Scale Mode Volume

Silica Nanofibers and Subwavelength-Diameter Fibers

Recent Progress in Optical Micro/Nanofiber Technology

Ring Resonator of Hollow-Core Photonic Crystal Fiber Based on Spatial Coupling Scheme

A Simple Approach to Fiber-Based Tunable Microcavity with High Coupling Efficiency

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Engineering Waveguide-Cavity Resonant Side Coupling in A Dynamically Tunable Ultracompact Photonic Crystal Filter

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

Ultrasmall-V High-Q Photonic Crystal Nanobeam Microcavities Based on Slot and Hollow-Core Waveguides

Luminescent Photonic Crystal Cavities for Fiber-Optic Sensors, Coupled Dissimilar Cavities and Optofluidics

High-Q Photonic Crystal Microcavities

Photonic crystal cavity on optical fiber facet for refractive index sensing.

Optical nanofiber-based cavity induced by periodic air-nanohole arrays

Coupled high-finesse optical Fabry-Perot microcavities

Implementation of a High- $Q$ , Small Mode Volume Cavity in Microfibers Using Lattice-Constant-Varying Nanohole Arrays

Cavity QED on a nanofiber using a composite photonic crystal cavity

Integrated Optomechanical Crystal Cavity

Modifying Photonic Crystal Fibres

Photopolymer Microtips for Efficient Light Coupling Between Single-Mode Fibers and Small-Core Photonic Crystal Fibers

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Arc Discharge Method to Fabricate Large Concave Structures for Open-Access Fiber Fabry-Pérot Cavities