Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Design and Fabrication of High-Quality Two-Dimensional Silicon-Based Photonic Crystal Optical Cavity with Integrated Waveguides

Fabrication of Optical Cavities with Femtosecond Laser Pulses

Design and Characterization of Line-Defected Silicon Waveguide and High-Q Optical Cavity

High Quality Photonic Crystal Waveguide Filters Based on Mode-Gap Effect

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

High- Q Photonic Crystal Cavity in a Single-Mode Silicon Ridge Waveguide

Design of Ultrahigh- $Q$ 1-D Photonic Crystal Microcavities

High-Q Photonic Crystal Microcavities

Optimized design for 2×106 ultra-high Q silicon photonic crystal cavities

Design of tapering one-dimensional photonic crystal ultrahigh-Q microcavities

High Quality Factor in A Two-Dimensional Photonic Crystal Cavity on Silicon-On-Insulator

Modeling and Characterization of Tunable Photonic Crystal Waveguides Based on Two-Dimensional Periodic Arrays of Silicon Pillars

Optimized Design For 2 X 10(6) Ultra-High Q Silicon Photonic Crystal Cavities

Designs and Experiments on Infrared Two-Dimensional Silicon Photonic Crystal Slab Devices

Two-Dimensional Silicon Photonic Crystal Slab Devices

High-Q Photonic Crystal Nanobeam Cavities on Silicon

Efficient resonance management in ultrahigh-Q one-dimensional photonic crystal nanocavities fabricated on 300 mm SOI CMOS platform

High-Q Side-Coupled Semi-2d-Photonic Crystal Cavity

High Quality Factor Photonic Crystal Micro-Cavity Design to Utilize Semiconductor Nonlinearities

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

Fabrication and Spectra-Measurement of High Q Photonic Crystal Cavity on Silicon Slabs