Abstract:An advanced smart sensor network is essential to a combustion system, which favors in situ, locally placed, and low-cost gas sensors. However, most chemical/electrochemical sensors fail to work in a combustion boiler, due to demanding operation temperatures (> 1000 °C). This work, for the first time, reports a well-functioning mixed-potential type CO sensor at 1000–1200 °C using nickel oxide (NiO) as the sensing material on the yttrium-stabilized zirconium (YSZ) oxide electrolyte. The influences of feed flow rate, electrode thickness, and porosity on the sensor behavior were investigated and the developed mixed potential gas sensor delivered notable and fast responses to 1000 ppm CO in 3% O2: 109 mV @1000 °C, 40 mV @1100 °C, and 7 mV @1200 °C. The sensing mechanism was identified different from the common theory based on CO oxidation coupled with oxygen reduction. A new mechanism is attributed to the inverse reactions: CO reduction coupled with oxygen evolution. For the first time, an inversion temperature was found for the CO-NiO reaction. Below the inversion temperature, CO oxidation occurs as commonly presented. Above the inversion temperature, CO is electrochemically reduced over NiO into carbon and oxygen ions, evidenced by electrochemical and compositional characterizations. The results can complement CO sensing mechanisms for mixed potential sensors and further trigger more research efforts to expand the working temperature limit of mixed potential sensors for practical application in combustion control systems.Graphical abstractBelow the inversion temperature, CO oxidationoccurs. Above the inversion temperature, CO is electrochemically reduced overNiO into carbon and oxygen ions. The results can complement CO sensingmechanisms for mixed potential sensors.

NO<sub>x</sub> Sensing Performances of Mixed-Potential-Type Gas Sensor Based on Stabilized-Zirconia and La<sub>5/3</sub>Sr<sub>1/3</sub>NiO<sub>4</sub> Sensing Electrode

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

High Performance Mixed Potential Type NO2 Gas Sensor Based on Porous YSZ Layer Formed with Graphite Doping.

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Effects of Ni Addition on the Response of La2cuo4 Sensing Electrode for No Sensor

Research on Preparation and Performance of a New Solid Electrolyte Based Nitrogen Oxides Sensor

Investigation of an Impedimetric LaSrMnO3-Au/Y2O3-ZrO2-Al2O3 Composite NOx Sensor

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Selective detection of NO using the perovskite-type oxide LaMO 3 (M = Cr, Mn, Fe, Co, and Ni) as the electrode material for yttrium-stabilized zirconia-based electrochemical sensors

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

A mixed-potential type NH3 sensors based on spinel Zn2SnO4 sensing electrode

NiO-based sensor for in situ CO monitoring above 1000 °C: behavior and mechanism

A review of high-temperature electrochemical sensors based on stabilized zirconia

Enhancement of La0.8Sr0.2MnO3-based amperometric total NOX sensor via modification with Pt nanoparticles

Room-Temperature Mixed-Potential Type ppb-Level NO Sensors Based on K 2 Fe 4 O 7 Electrolyte and Ni/Fe–MOF Sensing Electrodes