Abstract:The NO x (mainly NO and NO 2 ) pollutions that come from the exhaust of the thermal engines can give rise to a serious threat to the environment and human health. The design of more efficient and stable catalysts to reduce NO x to nitrogen in atmospheres containing excess oxygen (typically, from exhaust gas emitted by diesel and lean-burn gasoline engines) has attracted so much attention in the last years. The two actual technologies are using an additional reducing agent to remove NOx, i.e. Diesel fuel post-injection for the NOx storage reduction process and urea for the selective catalytic reduction. An alternative solution could be the electrochemical reduction of NOx in solid oxide electrolysis cell (SOEC) [1,2] that can save the huge reducing agents storage system. This study reports the electrochemical properties for NO x reduction of a Mixed Ionic Electronic Conducting (MIEC) porous electrode promoted by Pt nanoparticles, as efficient catalyst for oxidation reactions, and BaO, as sorbents to store NO x . Pt and BaO nanoparticles were finely dispersed in the porosity of a MIEC film, based on a composite between LSCF (La 0.6 Sr 0.4 Co 0.8 Fe 0.2 O 3-δ ) and GDC (Gd 0.2 Ce 0.8 O 1.9 ), which was deposited using screen-printing. This catalytic layer was interfaced on a dense pellet of gadolinium doped ceria (GDC), an O 2- ionic conductor. The Ba and Pt loadings were around and 150 and 5 µg/cm², respectively. The catalytic performances, upon positive and negative polarizations, have been measured as a function of temperature in the range 200°C-500°C, partial pressure of oxygen and in the presence of propene in the feed. The NO x electrochemical conversion into N 2 was found to be driven by the current (Figure 1) and the catalytic activity of the electrode for NO oxidation. In parallel, electrochemical properties have been carried out by using cyclic voltammetry and electrochemical impedance spectroscopy to investigate the electrocatalytic mechanism. Finally, the Pt and BaO nanoparticles in the LSCF/GDC film were characterized by transmission electronic microscopy. References T.J. Huang, C.Y. Wu, S.H. Hsu, C.C. Wu, Energy Environ. Sci. , 4 , 4061 (2011). R. M. L. Werchmeister, J. J. Bentzen, K. B. Andersen, and K. Kammer Hansen, J. Electrochem. Soc. , 161(10) H663-H669 (2014) Figure 1

Enhancement of La0.8Sr0.2MnO3-based amperometric total NOX sensor via modification with Pt nanoparticles

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Pt nanoparticle-functionalized Fe2(MoO4)3 hollow microspheres for parts-per-billion NO2 sensors operated at 80 °C

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

Enhanced and stable gas sensing performance towards NH3 with AuCu alloy nanoparticles modification over SnO2

Improved ppb-level NO2 conductometric sensor induced by trace Au on SnO2 nanosheet

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Investigation of an Impedimetric LaSrMnO3-Au/Y2O3-ZrO2-Al2O3 Composite NOx Sensor

ZnO single nanowire gas sensor: A platform to investigate the sensitization of Pt

Highly sensitive amperometric Pt-Nafion gas phase nitric oxide sensor: Performance and application in characterizing nitric oxide-releasing biomaterials

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

Pd@Pt Core-Shell Nanocrystal-Decorated ZnO Nanosheets for ppt-Level NO2 Detection

Pt Nanoparticle-Modified SnO 2 –ZnO Core–Shell Nanosheets on Microelectromechanical Systems for Enhanced H 2 S Detection

A Straightforward Solvent‐Pair‐Enabled Multicomponent Coassembly Approach toward Noble‐Metal‐Nanoparticle‐Decorated Mesoporous Tungsten Oxide for Trace Ammonia Sensing

Micellar Nanoreactors Enabled Site-Selective Decoration of Pt Nanoparticles Functionalized Mesoporous SiO2 /Wo3-X Composites for Improved CO Sensing.

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

Electrochemical Removal of NO<sub>x</sub> on Pt-Ba Impregnated Lscf/GDC Electrode

Electrochemical Removal of NOx on Pt-Ba Impregnated Lscf/GDC Electrode

Enhanced ammonia sensing response based on Pt-decorated Ti3C2Tx/TiO2 composite at room temperature

Pt Nanoparticle-Modified SnO<sub>2</sub>-ZnO Core-Shell Nanosheets on Microelectromechanical Systems for Enhanced H<sub>2</sub>S Detection