Abstract:As a major gas pollution source, nitrogen oxide (NO x , NO + NO 2 ) poses a serious threat to the natural environment and human health. Therefore, it is imperative to develop high-efficiency detection equipment for in-situ detection of NO x . The emission sources of NO x are mainly industrial exhaust gas and automobile exhaust gas. The gas temperature is relatively high and the composition is relatively complicated. The solid electrolyte-based gas sensor can realize high selectivity and high sensitivity detection of NO x at high temperature. In this study, a Co3O4/Cr2O3/YSZ composite material was used as the sensing electrode (SE) and YSZ was used as the solid electrolyte to prepare the impedance type of NO x sensor. The sensor was characterized by XRD, SEM and EDX, and the NO x sensing performance at high temperature was systematically studied. The results show that the Co3O4/Cr2O3/YSZ sensing electrode with particle size of about 200 nm has a high specific surface area due to the loose and porous structure, which is conducive to gas diffusion and mass transfer. The sensor shows a good response-recovery characteristic to NO x , and the concentration has little influence on the sensor. In addition, the sensor shows good reproducibility, stability, and selectivity. In order to further apply the sensor to in-situ detection of NO x under high temperature, we successfully prepared a novel self heated sensor. The sensor shows good sensitivity characteristics, and the concentration detection range is - . In addition, the self-heating sensor shows good reproducibility. This research will- provide new ideas for in-situ detection of NO x gas at high temperature.

Research on Preparation and Performance of a New Solid Electrolyte Based Nitrogen Oxides Sensor

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Solid-State Gas Sensors with Ni-Based Sensing Materials for Highly Selective Detecting NOx

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Room Temperature Mixed-Potential Solid-Electrolyte NO 2 Sensor for Environmental Monitoring

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

High-performance NO 2 gas sensor enabled by Fe, N co-doped GQDs modification and pulse-driven temperature modulation

Research on Application Characteristics of Zirconia-Based High-Temperature NOx Sensors

Synergistic Effect of Electron Scattering and Space Charge Transfer Enabled Unprecedented Room Temperature NO2 Sensing Response of SnO2

Sensing Properties and Mechanism of Gas Sensors Based on Room-Temperature Solution Processed NiO-Ni v Nanoparticles

Room temperature NO2 sensor with rapid recovery based on ZnO/In2O3 heterojunction

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

Gas sensors based on SnS 2 /In 2 O 3 for high performance NO 2 detection at room temperature

High-Performance Ppb Level NO2 Gas Sensor Based on Colloidal SnO2 Quantum Wires/Ti3C2Tx MXene Composite

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

An Ultrasensitive NO 2 Gas Sensor Based on a NiO-SnO 2 Composite with a Sub-ppb Detection Limit at Room Temperature

Confined Formation of Ultrathin ZnO Nanorods/Reduced Graphene Oxide Mesoporous Nanocomposites for High-Performance Room-Temperature NO 2 Sensors.

Ultra-high gas sensing properties of porous Cr2O3@SnO2 composite toward NOx based on the p-p heterostructure

Preparation and Investigation of NO Sensor Modified by Sodalite Zeolite