Abstract:As a major gas pollution source, nitrogen oxide (NO x , NO + NO 2 ) poses a serious threat to the natural environment and human health. Therefore, it is imperative to develop high-efficiency detection equipment for in-situ detection of NO x . The emission sources of NO x are mainly industrial exhaust gas and automobile exhaust gas. The gas temperature is relatively high and the composition is relatively complicated. The solid electrolyte-based gas sensor can realize high selectivity and high sensitivity detection of NO x at high temperature. In this study, a Co3O4/Cr2O3/YSZ composite material was used as the sensing electrode (SE) and YSZ was used as the solid electrolyte to prepare the impedance type of NO x sensor. The sensor was characterized by XRD, SEM and EDX, and the NO x sensing performance at high temperature was systematically studied. The results show that the Co3O4/Cr2O3/YSZ sensing electrode with particle size of about 200 nm has a high specific surface area due to the loose and porous structure, which is conducive to gas diffusion and mass transfer. The sensor shows a good response-recovery characteristic to NO x , and the concentration has little influence on the sensor. In addition, the sensor shows good reproducibility, stability, and selectivity. In order to further apply the sensor to in-situ detection of NO x under high temperature, we successfully prepared a novel self heated sensor. The sensor shows good sensitivity characteristics, and the concentration detection range is - . In addition, the self-heating sensor shows good reproducibility. This research will- provide new ideas for in-situ detection of NO x gas at high temperature.

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

Sensitivity and selectivity enhancement of the YSZ-based mixed-potential ammonia sensors with flame-spray-made double-sensing electrodes

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Research on Preparation and Performance of a New Solid Electrolyte Based Nitrogen Oxides Sensor

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

High Performance Mixed Potential Type NO2 Gas Sensor Based on Porous YSZ Layer Formed with Graphite Doping.

Solid-State Gas Sensors with Ni-Based Sensing Materials for Highly Selective Detecting NOx

A mixed-potential type NH3 sensors based on spinel Zn2SnO4 sensing electrode

Room Temperature Mixed-Potential Solid-Electrolyte NO 2 Sensor for Environmental Monitoring

Pompon-like Ni doped ZnO mesoporous microspheres for conductometric NO 2 sensing properties at room temperature

Potentiometric NO2 Sensors Based on Thin Stabilized Zirconia Electrolytes and Asymmetric (La0.8Sr0.2)0.95MnO3 Electrodes

A YSZ-based mixed potential sensor achieving fast detection and complete recovery to SO 2 through combining a high-temperature pulse and Pd catalyst in sensing electrode

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

YSZ-Based Mixed Potential Type Sensors Utilizing Pd-doped SrFeO 3 Perovskite Sensing Electrode to Monitor Sulfur Dioxide Emission

High-performance NO 2 gas sensor enabled by Fe, N co-doped GQDs modification and pulse-driven temperature modulation

Enhanced NO2 sensing performance of ZnO@ZnS core-shell structure fabricated using a solution chemical method

Room-Temperature Mixed-Potential Type ppb-Level NO Sensors Based on K 2 Fe 4 O 7 Electrolyte and Ni/Fe–MOF Sensing Electrodes