Abstract:With the progression of research on gas sensors, numerous studies are being carried out on the tuning of metal–organic framework (MOF)-derived semiconductor metal oxides (SMOs) for gas-sensing studies in lieu of traditionally synthesized SMOs to attain the desired result at lower temperatures and enhance the sensor response. Still, no comparative gas-sensing study between traditionally synthesized SMOs and MOF-derived SMOs has been conducted to understand the reasons behind such a higher activity. To gain insights into the enhanced activity and find the reasons behind the improved sensor response, a comparative gas-sensing study was carried out using octahedral Cu-MOF as a template to fabricate an MOF-derived CuO/NiO (CuO/NiOM) heterostructure and traditionally synthesized CuO/NiO (CuO/NiOD) heterostructure via the combustion route. More importantly, our study revealed that the substitution of Ni2+ ions into the MOF template did not destroy the porous hierarchical framework of Cu-MOF either during the calcination process or when the Ni2+ ions were added into the precursor medium. A higher surface area (35 m2/g) and porosity obtained during the process would have provided sufficient permeability channels for the sorption of NO2 molecules, leading to the formation of the maximum concentration of active sites. Our results revealed that MOF-template-derived CuO/NiOM showed a comparatively higher response of S% = 13.9%, with response and recovery times of 18 and 29 s, respectively, at a temperature of 110 °C compared to traditionally synthesized CuO/NiOD. Further, to attain efficient room-temperature activity with a higher sensor response and lower response and recovery times, a p–n heterojunction was formed at their interface by modifying n-type thermally reduced graphene oxide (rGO) with CuO/NiOM. The rGO-CuO/NiOM gas sensor showed a p-type behavior with a comparatively higher response of 23.9% toward 60 ppm of NO2 at room temperature, with the lowest response and recovery times of 10 and 15 s, respectively. In addition, the sensor also possessed ultralow detection ability up to 5 ppm of NO2 with fast response and recovery.

Effects of Ni Addition on the Response of La2cuo4 Sensing Electrode for No Sensor

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Efficient nitric oxide sensing on nanostructured La2MMnO6 (M: Co, Cu, Zn) electrodes

Chemical and Electronic Modulation via Atomic Layer Deposition of NiO on Porous In2O3 Films to Boost NO2 Detection

Enhancement of La0.8Sr0.2MnO3-based amperometric total NOX sensor via modification with Pt nanoparticles

Chemo-resistive NO2 sensor using La-doped WO3 nanoparticles synthesized by flame spray pyrolysis

Insight Into An Unusual Lanthanum Effect On The Oxygen Reduction Reaction Activity Of Ruddlesden-Popper-Type Cation-Nonstoichiometric La2-Xnio4+Delta (X=0-0.1) Oxides

Preparation and Characterization of NixMn0.25-xMg0.75Fe2O4 Nano-ferrite as NO2 Gas Sensing Material

High‐Temperature Protonic Conduction in La2NiO4+δ‐Based Ruddlesden–Popper Type Oxides: Correlation with Concentration of Interstitial Oxide Ions

Solid-State Gas Sensors with Ni-Based Sensing Materials for Highly Selective Detecting NOx

Effects of Ni doping on structural, magnetic and catalytic properties of copper ferrite

Study of the Gas Sensing Performance of Ni-Doped Perovskite-Structured LaFeO3 Nanospheres

Evaluation of Cu-substituted La1.5Sr0.5NiO4+δ as air electrode for CO2 electrolysis in solid oxide electrolysis cells

Synthesis of La1-xSrxCoO3-δ and its catalytic oxidation of NO and its reaction path

Preparation and Investigation of NO Sensor Modified by Sodalite Zeolite

Effects of Cu doping on electrochemical NOx removal by La0.8Sr0.2MnO3 perovskites

Effect of a Ni-Substituted Cu-MOF Precursor toward Efficient NO 2 Gas Detection: A Comprehensive Comparative Gas-Sensing Study of MOF-Derived and Traditionally Synthesized CuO/NiO-Based Nanocomposites

In-depth insight into the structural properties of nanoparticulate NiO for CO sensing

Selective detection of NO using the perovskite-type oxide LaMO 3 (M = Cr, Mn, Fe, Co, and Ni) as the electrode material for yttrium-stabilized zirconia-based electrochemical sensors

Influence of Ni doping on microstructural, optical and dielectric properties of lanthanum-based chromite