Abstract:The effects of temperature and pre-strain levels on the stress relaxation behavior and corresponding microstructural evolutions of Ti-6Al-4V alloys have been investigated experimentally and numerically in this study. A series of tests (stress relaxation (SR) and repeated stress relaxation (RSR)) and microstructural observations (scanning electron microscope) have been performed, based on which the deformation-related variables, i.e., stress component and activation energy, as a function of the testing time are calculated according to the classical thermal activation theories. The experimental SR behavior and the obtained thermal related variables show that at lower temperatures (700 °C and 750 °C), a large number of dislocations introduced by plastic loading enhance dislocation slip/climb creep, giving rise to rapid relaxation compared with those with elastic loading conditions at the same temperature. At higher temperatures (800 °C and 850 °C), a similar SR phenomenon has been observed at both elastic and plastic loading conditions, which is due to the severe interaction between diffusion creep and dislocation creep after the loading stage. Based on these results, a unified constitutive equation has been proposed to successfully predict the behavior of the whole stress relaxation process composed of the loading stage and subsequent SR stage. The model considering the continuous evolution of internal variables, e.g., dislocation density and lamellar width, in two stages can predict the stress response and microstructure variation with different temperatures from elastic to plastic loading and provide a foundation to effectively optimize the hot forming process combining pre-deformation and stress relaxation.

High Temperature Creep Strength of Si<sub>3</sub>N<sub>4</sub>-Y<sub>2</sub>Si<sub>2</sub>O<sub>7</sub> Ceramics by Stress Relaxation Based on a New Interpretation Model

High Temperature Creep Strength Of Si3n4-Y2si2o7 Ceramics By Stress Relaxation Based On A New Interpretation Model

Low-Temperature In Situ Large Strain Plasticity Of Ceramic Sic Nanowires And Its Atomic-Scale Mechanism

Direct Measurement of Residual Stresses and Their Effects on the Microstructure and Mechanical Properties of Heat-Treated Si3N4 Ceramics

High-Temperature Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>/Ti<sub>3</sub>SiC<sub>2</sub> Multilayer Ceramics

High-temperature Deformation Behavior of SiC-AlN Ceramic Alloys with Fine-grained Microstructure.

Creep Behavior of SiC Whisker-Reinforced Si3N4/BN Fibrous Monolithic Ceramics

Dynamic fatigue behavior of Si3N4-based ceramic tool materials at ambient and high temperatures

Creep behavior of sintered nano-silver at high temperature: experimental and theoretical analysis

Direct Measurement of Residual Stresses and Their Effects on the Microstructure and Mechanical Properties of Heat-Treated Si3N4 Ceramics II: with CeO2 As a Single Additive

High-temperature Fatigue Behavior in Pre-Cracked Silicon Nitride Composites Doped with Ytterbium Oxide

A Unified Constitutive Model of Stress Relaxation of Ti-6Al-4V Alloy with Different Temperatures from Elastic to Plastic Loading

An analytical model for the high temperature fracture strength of SiC fiber reinforced ceramic matrix composites considering oxidation and residual thermal stresses

Creep behaviour of an Al–Si–Al2O3 composite based on phase evolution at 1300oC

Mechanical Properties of Si3N4/BN Fibrous Monolithic Ceramics at Elevated-Temperature

A contribution of X ray diffraction analysis in the determination of creep of Si3N4 ceramics

Characterization of R-curve Behavior in Si3N4-based Ceramics

Slow Crack Growth Behavior of Silicon Nitride Ceramics in Cryogenic Environment

Flexure Creep Behaviors of Si<sub>3</sub>N<sub>4</sub>/BN Laminated Ceramic Composites Produced by Rolling

High-temperature tensile behavior of 3D SiC/SiC composites

High Temperature Creep Strength of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt;-Y&lt;sub&gt;2&lt;/sub&gt;Si&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;7&lt;/sub&gt; Ceramics by Stress Relaxation Based on a New Interpretation Model