Abstract:Silicon nitride possess excellent hot hardness and wear resistance coupled with very good corrosion resistance. Hence, in recent years, silicon nitride has been a serious contender as a reinforcement to develop light weight metal matrix composites for several technological applications. Al6061 is most popular matrix alloy as it possess excellent formability and in particular the quality of extrudates of Al6061 is quite high and are the most preferred in space and naval applications especially for support structures and torpedoes blades respectively. Improved corrosion and slurry erosion resistance on use of silicon nitride in nickel and aluminum alloy matrices have been reported by several researchers.In the light of the above, this paper focuses on development of Al6061- 6wt% Si3N4 by stir casting the most economical and popular route followed by hot extrusion. Hot extrusion was carried out using 200T hydraulic press at extrusion ratio of 1:10 at a temperature of 550 degrees C. Slurry erosion tests were carried out using 3.5% NaCl solution containing silica sand particles of size 312 pm at different rotational speeds varying between 300 rpm and 1200 rpm. The sand concentration was varied from 10 g/l to 40 g/l. Under identical test conditions, hot extruded Al6061- 6wt% Si3N4 composite do possess better slurry erosion resistance when compared with matrix alloy. The mechanism involved in the material removal process during slurry erosion process will also be discussed.

Erosion Wear Characteristics of Si<sub>3</sub>N<sub>4</sub> Fabricated from Low-Cost Powders

Erosion Wear Characteristics of Si<sub>3</sub>N<sub>4</sub> Fabricated from Low-Cost Powders

Erosion wear characteristics of Si3N4 fabricated from low-cost powders

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Erosion Wear Characteristics and Mechanism of Si<sub>3</sub>N<sub>4</sub> Ceramics: Effect of Impact Angle

Analysis on Wear Properties and Impact Factors for Si3N4 Ceramic Mated with Chilled Cast Iron

Erosion wear characteristics and mechanism of Si3N4 ceramics: Effect of impact angle

Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si3N4-SiC Composite

Effect of Abrasive Particle Size on Anti-Abrasion Performance of Si3N4 Ceramics

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Solid Particle Erosion Behavior of NiCr-Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> (8Y) Ceramic Composites

Solid Particle Erosion Behavior of NiCr-Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> (8Y) Ceramic Composites

Preparation, Properties and Growth Mechanism of Low-Cost Porous Si3N4 Ceramics with High Levels of β-Si3N4 Powders

Erosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid Flow

Study on Erosion Resistance of Structural Ceramics

Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder

Erosion-Wear Property of α-Al2O3 Structure Ceramics with Different Experiment Parameters

The relation of mechanical properties and resistance erosion-wear of structure ceramic

The Fabrication, Mechanical Property And Oxidation Of Si3n4 Ceramics With Rare Earth Oxide Addition

Slurry Erosive Wear Behavior of Hot Extruded Al6061-Si3n4 Composite

Erosion Wear Characteristics of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Fabricated from Low-Cost Powders

Erosion Wear Characteristics of Si<sub>3</sub>N<sub>4</sub> Fabricated from Low-Cost Powders

Erosion wear characteristics of Si3N4 fabricated from low-cost powders

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Erosion Wear Characteristics and Mechanism of Si&lt;sub&gt;3&lt;/sub&gt;N&lt;sub&gt;4&lt;/sub&gt; Ceramics: Effect of Impact Angle

Analysis on Wear Properties and Impact Factors for Si3N4 Ceramic Mated with Chilled Cast Iron

Erosion wear characteristics and mechanism of Si3N4 ceramics: Effect of impact angle

Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si3N4-SiC Composite

Effect of Abrasive Particle Size on Anti-Abrasion Performance of Si3N4 Ceramics

Erosive Wear Performance and Mechanism of Engineering Ceramic Materials

Solid Particle Erosion Behavior of NiCr-Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;-ZrO&lt;sub&gt;2&lt;/sub&gt; (8Y) Ceramic Composites

Solid Particle Erosion Behavior of NiCr-Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> (8Y) Ceramic Composites

Preparation, Properties and Growth Mechanism of Low-Cost Porous Si3N4 Ceramics with High Levels of β-Si3N4 Powders

Erosive Wear Behavior of Reaction Sintered Si3N4-SiCp Composite Ceramic in Liquid-Solid Flow

Study on Erosion Resistance of Structural Ceramics

Fabrication and Mechanical Properties of Porous Silicon Nitride Ceramics from Low-Purity Powder

Erosion-Wear Property of α-Al2O3 Structure Ceramics with Different Experiment Parameters

The relation of mechanical properties and resistance erosion-wear of structure ceramic

The Fabrication, Mechanical Property And Oxidation Of Si3n4 Ceramics With Rare Earth Oxide Addition

Slurry Erosive Wear Behavior of Hot Extruded Al6061-Si3n4 Composite

Erosion Wear Characteristics of Si<sub>3</sub>N<sub>4</sub> Fabricated from Low-Cost Powders

Erosion Wear Characteristics and Mechanism of Si<sub>3</sub>N<sub>4</sub> Ceramics: Effect of Impact Angle

Solid Particle Erosion Behavior of NiCr-Al<sub>2</sub>O<sub>3</sub>-ZrO<sub>2</sub> (8Y) Ceramic Composites