Abstract:Precipitation hardening by γ′ precipitates is an effective strengthening mechanism for designing novel high-entropy alloys (HEAs). The stability of these γ′ precipitates under elevated temperature irradiation is a major concern for their application in nuclear industry. In the present study, a γ′-strengthened FeCoNiCrTi0.2 HEA is irradiated using 6.4 MeV Fe3+ ions at 400 °C, 500 °C and 600 °C, respectively. After irradiation, transmission electron microscopy (TEM) and atom probe tomography (APT) has characterized the structural and compositional stability of the γ′ precipitates. The results show that the ordered L12 structure of γ′ precipitate is susceptible to the radiation damage, whereas their basic compositional features can sustain up to ∼13 dpa at these temperatures. APT reveals that the dissolution of γ′ precipitates start from the surface of the precipitates at the early stage of irradiation. Dissolution and disordering of the precipitates are dependent on the irradiation dose and temperature. APT also shows that small Ni and Ti-rich clusters form after irradiation at elevated temperatures. The behavior of γ′ precipitates under irradiation is believed to be controlled by two competing factors, displacement damage and radiation enhanced diffusion. Both can influence the radiation induced disordering/dissolution and reprecipitation.

The Thermostability of the Fe16N2phase Deposited on a GaAs Substrate by Ion-Beam-assisted Deposition

THE THERMOSTABILITY OF THE FE16N2 PHASE DEPOSITED ON A GAAS SUBSTRATE BY ION-BEAM-ASSISTED DEPOSITION

Enhancement Of The Thermal Stability Of Fe16n2 By Ti Addition

The Effect of Ti Addition on the Thermal Stability Of

Anomalous Magnetization Behavior of Fe-N Films Deposited by Reactive Pulsed Laser Deposition

Kinetic stabilization of Fe film on GaAs(100): An in situ x-ray reflectivity Study

Thermal Stability of Fe2o3 Nanowires

The stability of γ′ precipitates in a multi-component FeCoNiCrTi0.2 alloy under elevated-temperature irradiation

Epitaxial Fe16N2 Thin Film on Nonmagnetic Seed Layer

Theoretical study of thermal stability of α′′–Fe16N2 against other iron nitrides

Ferromagnetic Fe3N Films Grown on GaN(0002) Substrates by MOCVD

Relationship between the Crystallographic Structure of Electrodeposited Fe-P Alloy Film and its Thermal Equilibrium Phase Diagram

Magnetron-Deposited FeTiB Films: From Structural Metastability to the Specific Magnetic State

Ferromagnetic Fe3N films grown on GaN(0 0 0 2) substrates by MOCVD

Structural and chemical stability of thin films of Pt–Ga intermetallic compounds of GaAs(001)

Fe–N gradient films and epitaxial Fe16N2 single-crystal films

Effects of Substrate Temperature and Post-Annealing on Microstructure and Properties of (alcrnbsitiv)n Coatings

Phase Formation in Annealed Sputtered (Fe,ti)-N Films

Introducing a new heterogeneous nanocomposite thin film with superior mechanical properties and thermal stability

(Fe,Ti) 16N2 films with high saturation magnetization prepared by facing target sputtering

Thermal Stability of Tungsten Sub-Nitride Thin Film Prepared by Reactive Magnetron Sputtering