Abstract:In this study, an NH3 plasma-treated Cu/HZSM-5 sorbent was introduced to simultaneously remove H2S and PH3 in low-temperature and low-oxygen environments. The effects of the Cu loading amounts, modification methods, and plasma-treatment conditions on the adsorption–oxidation performance of the sorbents were investigated. From the performance test results, the sorbent treated by NH3 plasma with the specific energy input (SEI, electrical input energy to the unit volume of gas) value of 1 J·mL–1 (Cu/HZSM-5-[S1]) was identified as having the highest breakthrough capacities of 108.9 mg S·g–1 and 150.9 mg P·g–1 among all of the materials tested. After three times of regeneration, the sorbent can still maintain the ideal performance. The results of Fourier transform infrared (FT-IR) spectroscopy and CO2 temperature-programmed desorption (CO2-TPD) indicated that the NH3 plasma treatment can introduce amino groups (functional groups) onto the sorbent surface, which greatly increases the number and strength of the basic sites on the sorbent surface. Results of N2 adsorption/desorption isotherms and scanning electron microscopy–energy dispersive spectroscopy (SEM–EDS) showed that the morphology of the sorbent changed after the plasma treatment, which exposed more active sites (copper species). In situ IR spectra showed that the amino groups are continuously consumed during the reaction process, indicating that these amino groups can help sorbents to capture gas molecules. Moreover, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses indicated that CuO is the main active species and the consumption of CuO and accumulation of the reaction products on the surface and inner pores of the sorbent are the primary reasons for the deactivation of the sorbent.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02584?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02584</a>.Characterization methods (Appendix S1); effect of different Cu contents on the simultaneous removal of H2S and PH3 (Figure S1); discharge characteristics (Figure S2); N2 adsorption/desorption isotherms (Figures S3 and S4a); XRD patterns (Figures S4b and S5); wide-survey XPS spectra (Figure S6); sequential in situ IR spectra (Figure S7); physical properties (Tables S1 and S2); and XPS data (Table S3) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02584/suppl_file/am1c02584_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Kinetic Study on High-Temperature H2S Removal over Mn-Based Regenerable Sorbent Using Deactivation Model

Continuous and Controllable Synthesis of Mno2 Adsorbents for H2s Removal at Low Temperature

Kinetic and Thermodynamic Study of the Wet Desulfurization Reaction of ZnO Sorbents at High Temperatures

Kinetic model for desulfurization at medium temperature using hydrated absorbent

Desulfurization performance of iron-manganese-based sorbent for hot coal gas

Deactivation Model Study of High Temperature H2S Wet-Desulfurization by Using ZnO

Study of intrinsic sulfidation behavior of Fe2O3 for high temperature H2S removal

Dynamic Desulfurization Process over Porous Zn–Cu-Based Materials in a Packed Column: Adsorption Kinetics and Breakthrough Modeling

Interaction among Metal Components of Zn–Mn–Cu-Based Sorbents Prepared by High-Pressure Impregnation Method and Its Effect on the Removal of H2S from Hot Coal Gas

Kinetics of H2S Removal in Self-Circulative Complex Loop Reactors

Cu/HZSM-5 Sorbent Treated by NH 3 Plasma for Low-Temperature Simultaneous Adsorption–Oxidation of H 2 S and PH 3

Study on the Stability of Sorbents Removing H2S from Hot Coal Gas

Steam Regenerative Removal of Hydrogen Sulfide from Hot Syngas by a Novel Tin Oxide and Yttrium Oxide Sorbent

Controllable fabrication of persimmon wood-inspired macroporous (a%Co-Mn)1.5Al0.5Ox, high desulfurization performance and analysis of deactivation kinetic mechanism

Removal of sulfur at high temperatures using iron-based sorbents supported on fine coal ash

Kinetic Modeling for the Deactivation of TiO2 During the Photocatalytic Removal of Low Concentration SO2

Research Progress of Removal of H2S from Coal Gas by Dry Method

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

Removal of H 2 S from simulated blast furnace gas by adsorption over metal-modified 13X zeolite

DRY SO2 REMOVAL AT LOW TEMPERATURE USING CALCIUM-BASED SORBENTS

Kinetic study of sulfur dioxide removal reaction with manganese dioxide by random pore model using thermogravimetry