Abstract:A novel micro-electromechanical systems inertial switch based on non-silicon surface micromachining technology has been designed, fabricated and characterized in the present work. Compared with the traditional inertial switch, a compliant cantilever beam as a stationary electrode has been proposed to prolong the contact time, which can realize sufficient elastic deformation during the contact between the electrodes. The dynamic contact process is analyzed theoretically and the corresponding mechanical impact mechanism is also explained. To investigate the contact-enhancing mechanism of the cantilever beam, the switch applied half-sine acceleration with various amplitudes in the sensitive direction is simulated with ANSYS software. The dynamic simulation results confirm the contact-enhancing mechanism described by the theoretical analysis and it is shown that the contact time (i.e., the switch-on time) can be prolonged effectively by utilizing the elastic deformation of the cantilever beam and increased with the applied accelerations. The inertial switch is successfully fabricated by electroplating and sacrificial layer processes technologies. The prototype has been characterized by dropping hammer experiment. The test results indicate that the contact effect is improved significantly and the contact time is ∼80 µs under the 297 g acceleration, and the maximum value is ∼410 µs for the 672 g acceleration amplitude, which is in general accordance with the simulated results. The mechanical contact between the cantilever beam and the proof mass is evaluated following thousands of impacts. The scanning electron micrographs of the contact surfaces indicate that the all-metal switch still keeps a good mechanical property after suffering the hot contact, and the contact resistance is also stable.

High Durability Latch-Lock Bi-Stable Switch on Y-Shaped Cantilever

A Planar Single-Actuator Bi-Stable Switch Based On Latch-Lock Mechanism

A Planar Single-Actuator Bi-Stable Mechanical Latch As an Electrical Switch

A Planar Single-Actuator Bi-Stable Switch Based on Hookless Mechanism

A Planar Single-Actuator Bi-Stable Mechanical/Electrical Switch

An Acceleration Switch with A Robust Latching Mechanism and Cylindrical Contacts

A Latching Bistable Microswitch Using Dual-Beam Electrothermal Actuation.

Micro-Fabricated bi-stable Mechanical Switch Actuated by a Single Thermal Actuator

An acceleration latching switch with flexible contacts and barb latching mechanism

Design And Fabrication Of A Latching Silicon-Based Mems Switch

A Latching Acceleration Switch with Cylindrical Contacts Independent to the Proof-Mass

Design, Fabrication and Characterization of A Latching Acceleration Switch with Multi-Contacts Independent to the Proof-Mass

A high-G acceleration latching switch with integrated normally-open/close paths independent to the proof-mass

Heterogeneous Integrated MEMS Inertial Switch with Electrostatic Locking and Compliant Cantilever Stationary Electrode for Holding Stable ‘On’-State

A new latched 2×2 optical switch using bi-directional movable electrothermal H-beam actuators

Design And Characterization Of Single Beam For Latching Electrothermal Microswitch

A laterally-driven micromachined inertial switch with a compliant cantilever beam as the stationary electrode for prolonging contact time

Micro-cantilever Shocking-Acceleration Switches with Threshold Adjusting and ‘On’-State Latching Functions

A Latching Acceleration Switch with Multi-Contacts Independent to the Proof-Mass

A Heterogeneous Integrated MEMS Inertial Switch with Compliant Cantilevers Fixed Electrode and Electrostatic Locking to Realize Stable On-State

A Surface-Micromachining-based Inertial Micro-Switch with Compliant Cantilever Beam As Movable Electrode for Enduring High Shock and Prolonging Contact Time