Abstract:Composite materials are frequently exposed to external factors during their operational service, resulting in internal structural damage which subsequently impacts their structural performance. This paper employs ferromagnetic materials for their sensitivity to magnetic field strength. By detecting variations in the magnetic field within the embedded ferromagnetic microwires of composite materials, the aim is to indirectly assess the health status of the composite materials. Firstly, a theoretical numerical model for magnetic field intensity at the crack site was established. Subsequently, a finite element model was employed to analyze the variations in the magnetic characteristics of ferromagnetic microwires at the crack site. Under different parameter conditions, the patterns of magnetic signals at the crack site were determined. The results indicate that with an increase in the angle between the external magnetic field and the crack, the fitted curve of the magnetic signal shows a linear increase. The distance between the peak and valley of the radial magnetic signal in the axial direction decreases, and the axial magnetic signal transitions from double-peak to single-peak. With the increase in crack depth, the fitted curve of the magnetic signal shows a linear increase, and the magnetic signal at the crack tip also exhibits a linear increase. An increase in crack width leads to a non-linear decrease in the fitted curve of the magnetic signal, and after reaching a certain width, the magnetic signal stabilizes. For two identical cracks at different distances, the magnetic signal exhibits a transition from a complete pattern to two complete patterns. With the increase in the external magnetic field, the magnetic signal shows a completely regular linear increase. By analyzing and calculating the variations in magnetic signals, the patterns of magnetic characteristics under the damaged state of ferromagnetic microwires were obtained. This serves as a basis for assessing whether they can continue in service and for evaluating the overall health status of composite materials.

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Fatigue Fracture Surface Analysis and Fatigue Life Estimation of Corroded Steel Wires

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Characterization of Fatigue Crack Propagation of Pitting-Corroded Rebars Using Weak Magnetic Signals

Magnetomechanical Measurements for Nondestructive Evaluation of Failure in Steel Structural Element

A NEW APPROACH TO THE DETECTION OF FATIGUE DAMAGE IN RAILS USING PIEZOMAGNETIC EFFECTS

Mechanical and Magnetic Hysteresis As Indicators of the Origin and Inception of Fatigue Damage in Steel

Experimental research on fatigue properties of corroded steel bars based on dynamic piezomagnetism

Fatigue, Magnetic and Mechanical Hysteresis

Magnetic memory testing towards fatigue crack propagation of Q235 steel for remanufacturing

Metal magnetic memory characterization of fatigue crack propagation of Q345qD bridge steel under the influence of stress ratio

Monitoring Microstructure and Properties Changes in 35CrMo Steel Components Using Magnetic Hysteresis Loop and X-Ray Diffraction Techniques

Evolution of the Stress-Induced Residual Magnetic Field of X70 Pipeline Steel With Multiple Corrosion Defects

Fatigue Damage Analysis of Prefabricated Concrete Composite Beams Based on Metal Magnetic Memory Technique

Fatigue Crack Detection Based on Electromagnetic Testing

Application of Electromagnetism Method to Characterize the Degradation Behavior in Structural Mild Steel Within the Elastic Range

Research on Magnetic Testing Method of Stress Distribution

Research on Magnetic Field-Based Damage Detection Technology for Ferromagnetic Microwires

Study on the early fatigue damage evaluation of high strength steel by using three components of metal magnetic memory signal

Quantitative Inversion of Stress and Crack in Ferromagnetic Materials Based on Metal Magnetic Memory Method

A study on fatigue life evaluation of 42CrMo steel under cyclic loading based on metal magnetic memory method