Abstract:In this paper, the early fatigue damage evaluation of high strength steel was discussed. By using CH-3600 Gauss meter and three channel metal magnetic memory probe, the three components of MMM signal, including Bx, By and Bz signals, were collected, and a non-ferromagnetic three-dimensional platform was employed. Based on the high cycle fatigue test, the Bx, By and Bz signals, corresponding to different fatigue cycles, were collected. The results show that the lift-off of probe is important for the characteristic parameter of Bx, By and Bz signals (defining Bxave, Byave and Kz, respectively), as lift-off of probe increases, the characteristic parameter decreases fast and tends to be stable gradually. As fatigue cycle increases, the changes on Bxave, Byave and Kz are very similar, but compared with Byave, the Bxave and Kz change more smoothly and are more suitable for evaluating the early fatigue damage. As fatigue stress increases gradually, the values of Bxave-2 and Kz-2 increases linearly. At last, the experimental results are explained on the base of grain slip and magnetostriction effect, and the interaction of magnetic domain, dislocation and the internal stress is considered to be as the main reason for the change of Bxave and Kz.

Fatigue, Magnetic and Mechanical Hysteresis

Piezomagnetic Hysteresis As a Non-Destructive Measure of the Metal Fatigue Process

Experimental Analysis of the Piezomagnetic Properties of Ferromagnetic Steels Subjected to Cyclic Tensile Stress

Mechanical and Magnetic Hysteresis As Indicators of the Origin and Inception of Fatigue Damage in Steel

A NEW APPROACH TO THE DETECTION OF FATIGUE DAMAGE IN RAILS USING PIEZOMAGNETIC EFFECTS

Research on the Piezomagnetic Hysteresis of Ferromagnetic Steels under Elastic Cyclic Loadings with Variable Amplitudes

Experimental Study on Steel Bars' Fatigue Damage Based on Piezomagnetism

Determining the Fatigue Process in Ribbed Steel Bars Using Piezomagnetism

Experimental Analysis of the Piezomagnetic Behavior of Double-Shear Bolted Connections of Wire and Arc Additively Manufactured Steel

Experimental research on fatigue properties of corroded steel bars based on dynamic piezomagnetism

Theoretical and Experimental Investigation on the Magnetomechanical Effect of Steel Bars Subjected to Cyclic Load

Quantifying Fatigue Damage in Reinforced Concrete Beams Through Piezomagnetic Effect: A Fatigue-Magnetomechanical Coupling Approach

Characterization of Fatigue Crack Propagation of Pitting-Corroded Rebars Using Weak Magnetic Signals

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

Determination of fatigue mesoscopic mechanical properties of an austenitic stainless steel using depth-sensing indentation (DSI) technique

Effect of Strain Rate History on the Piezomagnetic Field of Ferromagnetic Steels

Study on the early fatigue damage evaluation of high strength steel by using three components of metal magnetic memory signal

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Fatigue Damage Analysis of Prefabricated Concrete Composite Beams Based on Metal Magnetic Memory Technique

Experimental study on stress detection of corroded steel bars based on piezomagnetic effect

Assessment of Fatigue Damage of Prefabricated Concrete Composite Beams with Piezomagnetic Signal