Abstract:A variable stiffness joint is a key element for structural deformation, which is widely used in morphing mechanisms including mechanical arms, folding wings, etc. By adjusting the stiffness of the joint according to the external environment and/or system instruction, the motion response of the mechanical system can be controlled and its security and stability can be guaranteed. How-ever, to develop a variable stiffness joint with small size and large bearing capacity is still challenging. Also, an accurate mathematical model and control method to describe the variable stiffness joint is very important. In this paper, a novel, compact and integrated rotating joint with variable stiffness is developed, whose rotational stiffness and motion can be real-time controlled. A new configuration of a stiffness-adjusting module with superior mechanical properties is pro-posed by changing the arm length of cantilever leaf springs. Then a universal mechanical model of stiffness which adapts to a wide range of deformation is proposed. The status of the stiffness -adjusting module is changed by rope driven in order to minize the structure. Angular displace-ment sensors and torque sensors are integrated to observe the static and dynamic performance of the joint. According to the established rotational stiffness model, the stiffness of the joint is adjusted by reverse calculation of the motor's rotating angle. A nonlinear Proportion-Integral -Derivative method based on a Genetic Algorithm is proposed for motion control. The experi-mental results show that the proposed joint, with large bearing capacity and a wide range of stiffness adjustment, has integration functions of driving and sensing, and can achieve a good motion control performance.

Static modeling of a cross-spring flexure pivot with variable cross-section

A Multi-Spring Component Modelling Approach for T-Stub Connections

Design and Modeling of a Variable Thickness Flexure Pivot

An Axial Semi-Rigid Connection Model for Cross-Type Transverse Branch Plate-to-chs Joints

Finite element analysis and experimental study of spiral flexure spring

Design And Optimization Of Flexure Hinges

A Variable Stiffness Actuator Based on Leaf Springs: Design, Model and Analysis

A novel design of a high-performance flexure hinge with reverse parallel connection multiple-cross-springs

A Semi-Analytical Modeling Method for the Static and Dynamic Analysis of Complex Compliant Mechanism

A New Nonlinear Spatial Compliance Model Method for Flexure Leaf Springs with Large Width-to-Length Ratio under Large Deformation.

Dynamic Modeling and Analysis of Pseudo-Elastic Flexure Hinges

Dynamic Modeling and Kinematic Behavior of Variable Cross-section Beam Based on the Absolute Nodal Coordinate Formulation

Extended Dynamic Stiffness Model for Analyzing Flexure-Hinge Mechanisms With Lumped Compliance

Modeling and Analysis of a Superelastic Elliptic Flexure Hinge Using Co-Rotational Beam Elements

Static Balancing of Flexural Pivots with Two Symmetrically Arranged Pre-Compressing Springs

A Higher-Order Variable Cross-Section Viscoelastic Beam Element Via ANCF for Kinematic and Dynamic Analyses of Two-Link Flexible Manipulators

Design and Performance Optimization of Large Stroke Spatial Flexures

RJVS: A novel, compact and integrated rotating joint with variable stiffness

Kinetostatic and Dynamic Modeling of Flexure-Based Compliant Mechanisms: A Survey

Modeling and Analysis of Planar Symmetric Superelastic Flexure Hinges

Design of Constant-Force Compliant Sarrus Mechanism Considering Stiffness Nonlinearity of Compliant Joints