Glomerular fibrinolytic activity in anti-GBM glomerulonephritis in rabbits.

Jim Malliaros,Jim Malliaros,S. Holdsworth,S. Holdsworth,Johann Wojta,Johann Wojta,Jonathan H. Erlich,Jonathan H. Erlich,P. Tipping,P. Tipping

DOI: https://doi.org/10.1038/KI.1993.281

IF: 19.6

1993-09-01

Kidney International

Abstract:

What problem does this paper attempt to address?

Design And Optimization Of Flexure Hinges

ShiXi Yang,Heng Pan,GongBiao Yan

2002-01-01

Abstract:Flexure hinges have been studied since 1960s. Recent intensive interest in MEMS makes flexure hinges our research focus again. As, an important part in micro-positioner, flexure hinges influence the accuracy, stability and durability of the entire system. This paper focuses on shape optimization of flexure hinges in an effort to obtain optimized accuracy and stress. We modeled several groups of flexure hinges, including right circular hinges, elliptical hinges, corner-filleted hinges and right angle hinges, with same stiffness by ANSYS, their accuracy and maximum stress were then compared, and results were presented and discussed, a conclusion was finally drawn.
Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Jing-hua Xu,Shu-you Zhang,Jian-rong Tan,Zhen Zhao

DOI: https://doi.org/10.1631/jzus.a1500003

2015-01-01

Journal of Zhejiang University SCIENCE A

Abstract:Multi-actuated rigid-flexible dynamic system exists widely in precision machinery and electrical control fields. The performances, such as kinematic, dynamic, electrical, magnetic, and thermal performances, are correlated and difficult to trap precisely. Therefore, a multi-actuated mechanism design method considering structure flexibility using correlated performance reinforcing is put forward. A system containing flexible subparts with multi degrees of freedom (DOF) with physical coordinate is converted into modal coordinate using ‘DOF×modal order’ square matrix. The structure flexibility is described by modal superposition of the shape mode which is considered as additional generalized coordinates. A dynamic equation with large DOF is formulated and reduced based on Craig-Bampton modal truncation. Using analogical design methodology with and without structure flexibility of the low voltage circuit breaker (LVCB), the extent of the performance impact of each subpart is obtained by calculating correlated Holm force, Lorentz force, electrodynamic repulsion force, electromagnetic force, and cantilevered bimetallic strip force. Design of experiments method is employed to reveal the hard-measuring properties using correlated relatively easy-measuring parameters. The trip mechanism is validated by an electrical performance experiment. results show that the structure flexibility can decrease the tripping velocity, which is non-negligible, especially for high frequency tripping. The method provides a reference significance for similar multi-actuated mechanism design.
Analysis on the Displacement Performances of Parallel Four-Bar Flexure Hinge Mechanism

沈剑英,杨世锡,周庆华,严拱标,曹坚

DOI: https://doi.org/10.1109/icemi.2009.5274656

2004-01-01

Abstract:The formulas of the displacement performances of single and double parallel four-bar flexure hinge mechanisms are theoretically given at first. Then, the output displacements and coupling errors of parallel four-bar flexure hinge mechanism are quantitatively analyzed by means of the finite element method (FEM). The analytical result demonstrates that for the same output displacement the coupling error of single parallel four-bar mechanism is far larger than that of double parallel four-bar mechanism. In the end, the conclusion can be drawn that double parallel four-bar mechanism should be adapted in nanopositioning field.
Design of a helix-based revolute flexure hinge with large stroke

Pengbo Liu,Guoming Yao,Liangliang Yan

DOI: https://doi.org/10.1109/3m-nano49087.2021.9599828

2021-08-02

Abstract:This paper develops a novel revolute flexure hinge consisting of helical spring-like structures. Thanks to the excellent deformation capability and geometric constraints of the helix structure, the developed flexure hinge achieves a large workspace (up to $pm 150^{circ}$ rotation angles) with high accuracy (zero axis drift). The stiffness model of the flexible hinge is derived based on the elastic beam theory to illustrate the relationship between end load and hinge deformations. The characteristics of the revolute hinge are further verified by finite element simulations. Compared with the traditional revolute flexure hinge, the developed design demonstrates a higher range and accuracy of rotation, as well as better ability of preserving the center of ration position but smaller compliance.
Design and Performance Optimization of Large Stroke Spatial Flexures

D. H. Wiersma,S. E. Boer,R. G. K. M. Aarts,D. M. Brouwer

DOI: https://doi.org/10.1115/1.4025669

2013-11-07

Journal of Computational and Nonlinear Dynamics

Abstract:Flexure hinges inherently lose stiffness in supporting directions when deflected. In this paper a method is presented for optimizing the geometry of flexure hinges, which aims at maximizing supporting stiffnesses. In addition, the new ∞-flexure hinge design is presented. The considered hinges are subjected to a load and deflected an angle of up to ±20 deg. The measure of performance is defined by the first unwanted natural frequency, which is closely related to the supporting stiffnesses. During the optimization, constraints are applied to the actuation moment and the maximum occurring stress. Evaluations of a curved hinge flexure, cross revolute hinge, butterfly flexure hinge, two cross flexure hinge types, and the new ∞-flexure hinge are presented. Each of these hinge types is described by a parameterized geometric model. A flexible multibody modeling approach is used for efficient modeling while it accounts for the nonlinear geometric behavior of the stiffnesses. The numerical efficiency of this model is very beneficial for the design optimization. The obtained optimal hinge designs are validated with a finite element model and show good agreement. The optimizations show that a significant increase in supporting stiffness, with respect to the conventional cross flexure hinge, can be achieved with the ∞-flexure hinge.

engineering, mechanical,mechanics
Research on A Two-Dimension Micromanipulator Utilizing Flexure Hinges

Hua-wei Ji,Shi-xi Yang,Zhao-tong Wu,Gong-biao Yan

DOI: https://doi.org/10.1109/icit.2005.1600804

2005-01-01

Abstract:The paper analyzes a four-bar parallel micromanipulator and a double four-bar parallel micromanipulator, uses the merits of two micromanipulators and wipes off their demerits to develop a compound four-bar parallel micromanipulator, the theoretical analysis and finite element simulation proves this proposed micromanipulator to be a little concentrated stress and little parasitic displacement error one. In the end, a two-dimension micromanipulator is manufactured, and the characteristics of input and output are studied, the experiment results show that the compound four-bar two-dimension micromanipulator has good performance
Theoretical Modeling and Experimental Verification of Elliptical Hyperbolic Hybrid Flexure Hinges

Yan Wang,Lizhong Zhang,Lixin Meng,Hongjie Lu,Yongheng Ma

DOI: https://doi.org/10.3390/sym16030345

2024-03-14

Symmetry

Abstract:A flexure hinge composed of elliptical and hyperbolic hybrid configurations is developed and analyzed in this paper. The analytical models of compliance, rotation accuracy, and maximum stress of the flexure hinge are established, and the correctness of the models is validated by finite element analysis and experiments. The influence of structural parameters on compliance and rotation accuracy is discussed. The concept of compliance stress ratio is proposed to assess the deformation capacity of flexure hinges when subjected to the same stress, which provides a basis for quantitatively comparing the comprehensive performance of flexure hinges. The performance of the hybrid flexure hinge is compared with that of elliptical, hyperbolic, and circular flexure hinges by taking the compliance accuracy ratio and the compliance stress ratio as the performance evaluation indexes. The results show that the hybrid flexure hinge combines the advantages of hyperbolic and elliptical hinges and has a balanced performance in compliance, rotation accuracy, and low stress. The designed hybrid flexure hinge is suitable for the support structure of fast steering mirrors, which provides a valuable reference for the engineering optimization design of flexure hinges.

multidisciplinary sciences
The Mechanical Behavior of the Double Piece of Tape Spring

Fu Ling Guan,Xingkun Wu,You Wei Wang

DOI: https://doi.org/10.1007/978-3-642-14831-6_14

2010-01-01

Abstract:A new type of hinges consisting of the tape springs with excellent mechanics properties that can be used to fold and deploy structural elements on spacecrafts is investigated. Deployable moments of the hinges are studied in order to determine the launch forces imposed on the structure and ensure correct deployment in space applications emission. The paper mainly researches its performance with both computational and experimental methods.This work focuses on the detailed non-linear finite-element (FE) simulations of the folding/unfolding process of 3D tape-spring hinges. A simple experiment is performed to measure critical moment of the hinge.
Research On Design Method Of Flexure Hinge

Yuhe Li,Qingxiang Li,Lifen Bai,Weifu Jia,Luyun Chen

2001-01-01

Abstract:Flexure hinge is a kind of new mechanical transmission mechanics. This paper presents a concise and accurate method of designing flexure hinge, deduces a series of calculating equations of rotating rigidity of flexure hinge. In addition, the design method and effects of design parameters on the performance of flexure hinge are discussed, and the computer-aided design and calculating method are put forward. Analysis of flexure hinge applied in Micro Electrical and Mechanical System (MEMS) is carried out through a design example of micro stage actuated by piezoelectric element. Analytical and experimental results indicate this method's advantageous features - high-efficiency and accuracy are evident.
Generalized Model and Configuration Design of Multiple-Axis Flexure Hinges

Lijian Li,Dan Zhang,Haibo Qu,Yingjia Wang

DOI: https://doi.org/10.1016/j.mechmachtheory.2021.104677

IF: 4.93

2022-03-01

Mechanism and Machine Theory

Abstract:This paper presents two generalized models that can quickly formulate the closed-form equations of compliance and precision for multiple-axis flexure hinges including symmetric and hybrid types under small-deflection occasions, and introduces new types of multiple-axis flexure hinges. Notch contours of multiple-axis flexure hinges are divided into multiple-axis base and mirror segments with multiple segments. Solving closed-form compliances and precisions of multiple-axis flexure hinges is transformed into several definite integrals associated with the notch shape functions of designated base segments and matrix operations. The closed-form compliances for the conic-section, elliptical-arc and truncated-cone base segments are derived. Utilizing the pre-designed base segments, mirroring operations and serial combination design, more than two hundred multiple-axis flexure hinges are designed and their closed-form compliances can be formulated with the presented models, and tedious integral operations are avoided. The presented models are verified by means of the finite element results and existing equations. The design domain is introduced and the performances of the designed hinges are investigated. The presented models and designed hinge configurations are helpful in improving the integrated performances of spatial compliant mechanisms.

engineering, mechanical
Study on Design Method of One-Axis Flexure Hinge

李玉和,李庆祥,陈璐云,白立芬

DOI: https://doi.org/10.3321/j.issn:1000-0054.2002.02.009

2002-01-01

Abstract:To avoid the complexity of the design in flexure hinge, one concise and accurate design method is presented for the one axis flexure hinge and a series of calculating equations of rotating rigidities of flexure hinge are deduced. Then the design method and the effect of the design parameters on the performance of one axis flexure hinge are discussed. In the end the application analysis of the one axis flexure hinge in a micro electro mechanical system (MEMS) is carried out through a design example of micro stage actuated by piezoelectric element, and the advantages of the method, time saving and high efficiency, are shown.
Optimization Design of a Hyperbolic Flexure Hinge Based on Its Closed-Form Equations

Junfeng Hu,Xiangfu Cui,Pei Li

DOI: https://doi.org/10.4028/www.scientific.net/amm.151.414

2012-01-01

Applied Mechanics and Materials

Abstract:An optimization design method of a hyperbolic flexible hinge is presented in this paper. According to the structure feature and force exerted on the flexible hinge, the closed-form equations are formulated for compliances to characterize both the active rotation and all other in- and out-of-plane parasitic motions by using the Castigliano’s second theorem. Meanwhile, the accuracy equations of the hyperbolic flexure hinge are obtained using the Castigliano’s second theorem. The in-plane rotation angle of flexure hinge is optimization objective, and the constraints of optimization model are out-of-plane displacements and one described the accuracy of hinge, such that the optimization model can be established to meet performance requirements of flexure hinge. Based on the optimization model, the optimization designs of hyperbolic flexure hinge are performed to acquire its optimized structural parameters. And the optimization results have showed the optimization process can meet the design requirement.
Development of novel multiple-axis flexure hinges based on hook function curve and a generalized model for multiple-axis flexure hinges

Yunsong Du,Shuoshuo Liu,Tiemin Li

DOI: https://doi.org/10.1177/09544062231222710

2024-01-20

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. A novel asymmetric multiple-axis hook-function-curve (HFC) flexure hinge (HFCFH) with higher motion precision is proposed. For obtaining high-accuracy compliance and motion precision models of multiple-axis flexure hinges, a brief and generalized analytical model is presented by using the finite beam based matrix modeling (FBMM) method. It can be used to quickly obtain the compliance and precision models by just changing the notch contour functions. The comparative results prove the high accuracy and efficiency of the analytical model. For a much fairer comparison of motion precision between flexure hinges, a new precision model is proposed, in which a non-dimension and more intuitive precision matrix is defined. By using the precision model, the comparison of motion precision between multiple-axis HFCFHs and other multiple-axis flexure hinges indicates that asymmetric flexure hinges have higher motion precision, and multiple-axis HFCFHs also have higher motion precision in asymmetric flexure hinges. Based on the design concept of hybrid flexure hinges, eight types of hybrid multiple-axis flexure hinges with much higher performance are designed, enriching the types of multiple-axis flexure hinges and providing more reference for the selection of hinges in spatial compliant mechanisms.

engineering, mechanical
Research on zero-stiffness flexure hinge (ZSFH) based on spring four-bar linkage(4BSL)

Tian Liu,Shusheng Bi,Yanbin Yao,Zhaohui Dong,Qizi Yang,Lang Liu

DOI: https://doi.org/10.1016/j.mechmachtheory.2019.103633

IF: 4.93

2020-01-01

Mechanism and Machine Theory

Abstract:In order to overcome the spring back behavior of the conventional flexure hinge, the positive and negative stiffness matching method is used. The spring four-bar linkage(4BSL) is designed as a negative stiffness rotation mechanism, while the inner and outer ring of the flexure hinge (IORFH) is used as a positive stiffness mechanism. By coupling the 4BSL and the IORFH, a novel Zero-stiffness Flexure Hinge(ZSFH) is constructed. The negative stiffness characteristics of the 4BSL are analyzed and the spring of 4BSL is designed as linear rectangular leaf spring string. The zero-stiffness quality of the ZSFH based on 4BSL (ZSFH_4BSL) is analyzed, and the influence of structural parameters of the ZSFH_4BSL on zero-stiffness quality is explored. Samples are made and verified by experiments. The test results show that in the range of ±20°, the torque is reduced by 95% compared with the IORFH, and the relative error between the test result and the theoretical result is less than 7%, which verifies the validity of the theoretical analysis and the excellence of the design scheme.

engineering, mechanical
Theoretical, numerical, and experimental investigation on the compliance and natural frequency of sinusoidal flexure hinges

Qiliang Wang,Yiping Long,Jianming Wei,Junfeng Hu,Youwen Yang

DOI: https://doi.org/10.1002/eng2.12626

2023-01-17

Engineering Reports

Abstract:A new type of sinusoidal flexure hinge is proposed in this article. The compliance and precision factors formulas of the hinge were derived based on the Euler–Bernoulli beam theory and the Gauss–Legendre quadrature formula. The natural frequency was also investigated based on the transfer matrix method. To design a flexure hinge with high precision and high natural frequency, the sinusoidal flexure hinge is proposed in this article. First, the formulae for the compliance and precision factors of the hinge were derived based on the Euler–Bernoulli beam theory and the Gauss–Legendre quadrature formula. The natural frequency was also investigated based on the transfer matrix method. Compared with the simulation results of ANSYS Workbench, the results show that the modeling error is less than 6.7%. Second, the influence of structural parameters on compliance, precision factor, compliance precision ratio, and natural frequency was analyzed. The results show that compliance and precision are often contradictory, and the minimum thickness significantly influences the hinge's performance. Compared with conic flexure hinges in terms of compliance, precision, compliance precision ratios, and natural frequency, the sinusoidal flexure hinges have a better comprehensive performance. Finally, a flexure hinge was manufactured, and compliance was measured. The experimental results show that the error between the experimental value and the modeling value is 7.8%. Both simulation and experimental results verify the effectiveness of the sinusoidal flexure hinge model.
Two-axis flexure hinges with variable elliptical transverse cross-sections

Huaxian Wei,Yanling Tian,Yongjie Zhao,Mingxiang Ling,Bijan Shirinzadeh

DOI: https://doi.org/10.1016/j.mechmachtheory.2022.105183

IF: 4.93

2022-12-02

Mechanism and Machine Theory

Abstract:Flexure hinges are fundamental elements of compliant mechanisms. Therefore, the development of novel primitive flexure hinges is of great value. In this study, the basic structures of notch-type flexure hinges were extended by focusing on their transverse cross-sections, that is, the cross-sections perpendicular to the central axis. A group of primitive flexure hinges with variable elliptical transverse cross-sections (ETC) was developed and investigated. Analytical models for ETC flexure hinges were developed and verified through finite element analyses and experiments. The anisotropic two-axis compliances of the ETC flexure hinges were evaluated using computational analyses. The differences and relations in compliances, rotational precisions, and stresses between the ETC and existing primitive flexure hinges are discussed. An application case of the ETC flexure hinges is presented, which improves the ETC-based compliant mechanisms that can achieve much higher actuation efficiency owing to the simultaneous increase in compliances and decrease in stress concentration. The ETC flexure hinges enhance the design space of the primitive flexure hinges, addressing the knowledge gap between flexure hinges with rectangular and circular transverse cross-sections.

engineering, mechanical
Optimal Design for Compliant Mechanism Flexure Hinges: Bridge-Type

Chia-Nan Wang,Fu-Chiang Yang,Van Thanh Tien Nguyen,Quoc Manh Nguyen,Ngoc Thai Huynh,Thanh Thuong Huynh

DOI: https://doi.org/10.3390/mi12111304

IF: 3.4

2021-10-23

Micromachines

Abstract:Compliant mechanisms’ design aims to create a larger workspace and simple structural shapes because these mechanical systems usually have small dimensions, reduced friction, and less bending. From that request, we designed optimal bridge-type compliant mechanism flexure hinges with a high magnification ratio, low stress by using a flexure joint, and especially no friction and no bending. This joint was designed with optimal dimensions for the studied mechanism by using the method of grey relational analysis (GRA), which is based on the Taguchi method (TM), and finite element analysis (FEA). Grey relational grade (GRG) has been estimated by an artificial neural network (ANN). The optimal values were in good agreement with the predicted value of the Taguchi method and regression analysis. The finite element analysis, signal-to-noise analysis, surface plot, and analysis of variance demonstrated that the design dimensions significantly affected the equivalent stress and displacement. The optimal values of displacement were also verified by the experiment. The outcomes were in good agreement with a deviation lower than 6%. Specifically, the displacement amplification ratio was obtained as 65.36 times compared with initial design.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Modelling and performance analysis of a curvature-adjustable multiple-axis flexure hinge based on Bézier curve

Xuewen Wang,Yang Yu,Zhenbang Xu,Anpeng Xu,Chao Qin

DOI: https://doi.org/10.1177/09544062231206660

2023-11-08

Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science

Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In order to solve the uniqueness of the compliance equations and each notch profile, a curvature-adjustable multiple-axis flexure hinge with complex notch profiles is designed and investigated based on Bézier curve in this paper. The hinge can evolve into multiple-axis flexure hinges with single and hybrid, symmetric and asymmetric notch profiles composed of the ellipse, circle, hyperbola and parabola. In addition, analytical compliance equations in six degrees of freedom based on the Castigliano's Second Theorem are proposed. Then, a simplified notch profile classification method based on a binary quadratic implicit equation is proposed. Moreover, analytical compliance equations are validated by finite element analysis. The maximum relative error between the finite element analysis and the analytical results is 6.07%. Finally, the compliance, precision of rotation and stress are investigated based on structural parameters. The results show that the change in the rotation centre does not significantly affect the axial and bending compliance for the flexure hinge with a specific single and flush Bézier curve notch profile. Moreover, the flexure hinge with a notch profile consisting of ellipse and hyperbola has the highest rotational precision. The proposed curvature-adjustable multiple-axis flexure hinge can provide more compliance options for the design of compliant mechanisms.

engineering, mechanical
A novel compliance modeling method for compliant parallel mechanisms and its application

Shuang Zhang,Jingfang Liu,Huafeng Ding,Guohua Gao

DOI: https://doi.org/10.1016/j.mechmachtheory.2021.104336

IF: 4.93

2021-08-01

Mechanism and Machine Theory

Abstract:A novel compliance modeling method for flexure-hinge-based (FHB) compliant parallel mechanisms is proposed, where internal constraint of branches is taken into consideration based on flexibility-center-decomposition method of compliance matrix and screw theory. The modeling method is employed to transform deformation problem of branches into statics and kinematics problems of pseudo-rigid-body branches. Firstly, the virtual branch is established and its corresponding decoupled compliance matrix is obtained. Then, the compliance modeling of the whole mechanism is obtained by static equilibrium equation and kinematic relations. Secondly, a constraint performance index reflecting ability to constrain undesirable deformation of the compliant parallel mechanism is presented based on the decoupled compliance matrix. The effectiveness of the constraint performance index is verified through analysis of degree of freedom (DoF) of the 3-SS mechanism. Finally, the proposed modeling method and performance index are used in design and analysis of a novel RPR compliant parallel mechanism. To our knowledge, constraint performance index is firstly proposed for assessing the ability to constrain undesirable deformation of the compliant parallel mechanism.

engineering, mechanical
Design of Circular Cross-Section Corner-Filleted Flexure Hinges for Three-Dimensional Compliant Mechanisms

Nicolae Lobontiu,Jeffrey S. N. Paine

DOI: https://doi.org/10.1115/1.1480022

2002-08-06

Journal of Mechanical Design

Abstract:The paper introduces the circular cross-section corner-filleted flexure hinges as connectors in three-dimensional compliant mechanism applications. Compliance factors are derived analytically for bending, axial loading and torsion. A circular cross-section corner-filleted flexure hinge belongs to a domain delimited by the cylinder (no fillet) and the right circular cross-section flexure hinge (maximum fillet radius). The analytical model predictions are confirmed by finite element simulation and experimental measurements. The circular cross-section corner-filleted flexure hinges are characterized in terms of their compliance, precision of rotation and stress levels.

engineering, mechanical

Glomerular fibrinolytic activity in anti-GBM glomerulonephritis in rabbits.

Design And Optimization Of Flexure Hinges

Multi-actuated Mechanism Design Considering Structure Flexibility Using Correlated Performance Reinforcing

Analysis on the Displacement Performances of Parallel Four-Bar Flexure Hinge Mechanism

Design of a helix-based revolute flexure hinge with large stroke

Design and Performance Optimization of Large Stroke Spatial Flexures

Research on A Two-Dimension Micromanipulator Utilizing Flexure Hinges

Theoretical Modeling and Experimental Verification of Elliptical Hyperbolic Hybrid Flexure Hinges

The Mechanical Behavior of the Double Piece of Tape Spring

Research On Design Method Of Flexure Hinge

Generalized Model and Configuration Design of Multiple-Axis Flexure Hinges

Study on Design Method of One-Axis Flexure Hinge

Optimization Design of a Hyperbolic Flexure Hinge Based on Its Closed-Form Equations

Development of novel multiple-axis flexure hinges based on hook function curve and a generalized model for multiple-axis flexure hinges

Research on zero-stiffness flexure hinge (ZSFH) based on spring four-bar linkage(4BSL)

Theoretical, numerical, and experimental investigation on the compliance and natural frequency of sinusoidal flexure hinges

Two-axis flexure hinges with variable elliptical transverse cross-sections

Optimal Design for Compliant Mechanism Flexure Hinges: Bridge-Type

Modelling and performance analysis of a curvature-adjustable multiple-axis flexure hinge based on Bézier curve

A novel compliance modeling method for compliant parallel mechanisms and its application

Design of Circular Cross-Section Corner-Filleted Flexure Hinges for Three-Dimensional Compliant Mechanisms