Abstract:Current design methods for flexure (or compliant ) mechanisms regard stress as a secondary, limiting factor. This is remarkable because stress is also known as a useful design parameter. In this paper we propose the Stress And Geometry (STAGE) method, to design the geometry of a flexure mechanism together with a desired stress field. From this design, the stress-free to-be-fabricated geometry is computed using the inverse finite element method. To demonstrate the potential of the method, the geometry of the well-known crossed-flexure pivot is taken as example. We first show how this mechanism can be redesigned for the same functional geometry with various internal stresses. This results for a specific choice of stress field in a design of a crossed-flexure pivot with 23% lower peak stresses during motion as compared to the known designs, for a ± 45° rotation. We then present a second example, of a Folded Leaf Spring (FLS). With a parameter sweep the optimal stress field is calculated, showing a peak stress reduction of 28% during motion. This result was validated with an experiment, showing a normalized mean absolute error of 5.5% between experiment and theory. With a second experiment it was verified that the functional geometry of the FLS with internal stresses was equal to the one without internal stresses, with geometric deviations smaller than half the thickness of the flexures.

Static Balancing of Flexural Pivots with Two Symmetrically Arranged Pre-Compressing Springs

A Feasible Symmetric State of Initial Force Design for Cable-Strut Structures

Finite element analysis and experimental study of spiral flexure spring

The Design Study of Single Plane Vertical Hard Bearing Dynamic Balancing Machine

The Design of Dynamic Balancing Machine Based on Finite Element Analysis

OPTIMIZATION OF PRESTRESS IN THE SHELL EMBEDDED OF SELF-BALANCING UNIT

Optimal Bracing System Design for Funicular Twin Arches Against Out-of-plane Buckling

Critical load of frames with flexural-typed bracings and threshold stiffnesses for the bracings

Perfect static balancing using Cardan-gear spring mechanisms

A novel design of a high-performance flexure hinge with reverse parallel connection multiple-cross-springs

Analytical springback assessment and compensation in 3D multi-point flexible stretch bending forming

Theoretical and Experimental Investigation of Core-Separated Buckling-Restrained Braces

A New Stiffness-Strength-relationship-based Design Approach for Global Buckling Prevention of Buckling-Restrained Braces

Research on zero-stiffness flexure hinge (ZSFH) based on spring four-bar linkage(4BSL)

Optimal design of steel buckling-restrained braces considering stiffness and strength requirements

Design of a Flexure-Based XY Positioning Stage with Balanced Axial Forces on Decoupling Modules

Multi-blade monolithic Euler springs with optimised stress distribution

The STAGE method for simultaneous design of the stress and geometry of flexure mechanisms

Parametric Stability Investigation of a Spring-Attached and Viscoelastic-Supported Pre-twisted Sandwich Beam

Performance research and safety verification of compound structure air spring

The Optimization of Spring Stiffness for Passive Dynamic Walker.