Abstract:High-density dislocations and nano-twinning are known to significantly influence the work hardening ability of materials, presenting a potent approach for enhancing their overall strength. Here, a superior tensile strength-ductility synergy in a FeCoCrNiMo0.2 high entropy alloy (HEA) with high density dislocation and nano-twinning was achieved by employing cryo-rolling followed by subsequent annealing. Through electron microscope observation, the effects of geometrically necessary dislocation density and nano-twinning on tensile strength and plasticity are elucidated. The microstructure analysis reveals a substantial presence of dislocations and nano-twinning within the deformed grains following short-time annealing at 600 °C and 800 °C. The strategic presence of nano-twins serves as effective impediments to dislocation slip, resulting in the storage of dislocations within the grains, which contributes to the alloy's superior strength-ductility synergy and remarkable work hardening ability. Impressively, the obtained tensile strength-ductility matching exhibits yield strength and ductility values of 992.1 MPa/0.19 and 719 MPa/0.39, respectively. Upon increasing the annealing temperature to 1000 °C, high-density annealing twins emerge in the recrystallized grains, accompanied by a concomitant reduction in the geometrically necessary dislocation density due to dislocation rearrangement and annihilation. Furthermore, a small amount of topological close-packed (TCP) phase and L12 phase precipitation during annealing are observed, contributing to increased work hardening ability of the alloy. The findings underscore the importance of microstructural engineering as a valuable strategy for optimizing the mechanical properties of HEAs with a face-centered cubic structure.

Tuning Mechanical Properties of High Entropy Alloys by Electro-Pulsing Method

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Plasticity Improvement in a Co-Rich Co<sub>40</sub>Fe<sub>25</sub>Cr<sub>20</sub>Ni<sub>15</sub> High-Entropy Alloy via Al Alloying

Plasticity Improvement in a Co-Rich Co40Fe25Cr20Ni15 High-Entropy Alloy via Al Alloying

Microstructure and Mechanical Property Evolution during Annealing of a Cold-Rolled Metastable Powder Metallurgy High Entropy Alloy

Development of a large size FCC high-entropy alloy with excellent mechanical properties

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Strengthening Al0.1CoCrFeNi high-entropy alloy via multiaxial cryogenic forging and low temperature annealing

Achieving superior strength-ductility balance of Co–Cr–Fe–Ni high entropy alloy via annealing

Heterogeneous Microstructure and Tensile Properties of Fe50Mn30Co10Cr10 Metastable High-Entropy Alloy

Tailoring Mechanical and Electrochemical Properties of the Cr15Fe20Co35Ni20Mo10 High-Entropy Alloy via the Competition between Recrystallization and Precipitation Processes

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Tunability of the Mechanical Properties of (Fe50mn27ni10cr13)100-Mo High-Entropy Alloys Via Secondary Phase Control

A new strategy to overcome the strength-ductility trade off of high entropy alloy

Enhancing cryogenic yield strength and ductility of the Al 0.1 CoCrFeNi high-entropy alloy by synergistic effect of nanotwins and dislocations

Co-free CuFeMnNi high-entropy alloy with tunable tensile properties by thermomechanical processing

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Toughening FeMn-based High-Entropy Alloys Via Retarding Phase Transformation