Abstract:The development of alloys with good combinations of strength-ductility and corrosion resistance is a long-standing research theme for advanced materials engineering, which also holds true for the newly emerged high-entropy alloys (HEAs). Here, Ni/Ti-rich precipitates and heterogeneous structure were introduced for the primary purpose of improving strength-plasticity synergy of a Co-free Fe4Ni4Mn2CrTi HEA with good anti-corrosion performance. Specifically, four typical states of this HEA were tailored and compared, including i) as-cast, ii) homogenized, iii) post deformation annealing (PDA) sample with heterogeneous structure and iv) PDA sample with homogeneous structure. The structural features, mechanical properties, and underlying phase transformation mechanisms were systematically investigated. Phase transformation of η-D024 to γ′-L12 was realized during annealing treatments, based on the intrinsic stacking faults formed by repeating removal of the (0001) planes in the η structure. Compared with the homogenized counterpart, the strength-ductility synergy was achieved in the alloy iv, showing an evident increment of ∼43.4% in yield strength ( σ 0.2 ) and ∼57.8% in ultimate tensile strength ( σ U T S ), respectively, resulting from solid-solution strengthening, grain-boundary strengthening and precipitation strengthening, yet without sacrificing ductility. Good combinations of strength and ductility were also achieved in the alloy iii with heterogeneous structure, possessing an even higher σ 0.2 and σ U T S yet maintaining a moderate elongation, whose strength contribution from hetero-deformation induced hardening is recognized as a significant strengthening mechanism. Additionally, in comparison with the conventional corrosion-resistant 304 stainless steel, compact TiO2 and Cr2O3 in the passive film give rise to more superior anti-corrosion properties of the homogenized HEA. This paper provides a new paradigm in the controllable design of novel low-cost high-performance HEAs for achieving their potential structural and functional engineering applications.

A new strategy to overcome the strength-ductility trade off of high entropy alloy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Strengthening CrFeCoNiMn0.75Cu0.25 high entropy alloy via laser shock peening

Strength-ductility synergy of an additively manufactured metastable high-entropy alloy achieved by transformation-induced plasticity strengthening

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Strength–Ductility Mechanism of CoCrFeMnNi High-Entropy Alloys with Inverse Gradient-Grained Structures

Strain delocalization in a gradient-structured high entropy alloy under uniaxial tensile loading

Enhanced strength-ductility synergy via novel bifunctional nano-precipitates in a high-entropy alloy

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Achieving excellent strength-ductility synergy via high density dislocation and nano-twinning in cryo-rolled FeCoCrNiMo0.2 high-entropy alloy

Strengthening the FeCoCrNiMo0.15 high entropy alloy by a gradient structure

Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy

Break the strength and ductility trade-off in novel NbC reinforced Fe40.5(CoCr)25Mn17.5Ni10Si5 high entropy alloy

Strain partitioning enables excellent tensile ductility in precipitated heterogeneous high-entropy alloys with gigapascal yield strength

Gradient structured high-entropy alloy with high hardness and corrosion resistance after laser shock peening

Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion

Exceptional strength–ductility combination of CoCrFeMnNi high-entropy alloy with fully recrystallized structure by selective laser melting after post-deformation annealing

Realizing good combinations of strength-ductility and corrosion resistance in a Co-free Fe4Ni4Mn2CrTi high-entropy alloy via tailoring Ni/Ti-rich precipitates and heterogeneous structure

Enhanced strength and ductility synergy of a CoCrFeMnNi high entropy alloy with a hierarchical structure via severe distortion

Heterogeneous Structure Design to Strengthen Carbon-Containing CoCrFeNi High Entropy Alloy

Fabrication of a strong and ductile FeCoCrNiMo0.3 high-entropy alloy with a micro-nano precipitate framework via laser powder bed fusion