Abstract:Achieving an optimal balance between mechanical properties, dielectric properties, and thermal shock resistance presents a significant challenge in the development of advanced ceramics. This study investigates Si3N4-BN composite materials, prepared by hot-press sintering with magnesium aluminum silicate (MAS) as the sintering additive, to assess the impact of varying hexagonal boron nitride (h-BN) content on their mechanical and dielectric properties, as well as their thermal shock resistance. At an h-BN content of 20 wt.%, the BN layers act as a toughening phase through a pull-out mechanism, minimally impacting the composite's density. This composition results in superior fracture toughness (7.4 MPa·m1/2), high strength (598 MPa), low dielectric constants (∼6.8), and dielectric loss (∼7.4×10-3). Notably, after a thermal shock at 1000°C, the composite exhibits a peak residual strength of 621 MPa, surpassing its initial strength. This enhanced performance is attributed to the formation of a dense Mg-Al-Si-B-O oxide glass layer on the surface during thermal shock, which not only repairs surface defects but also induces compressive stress. The development of the Si3N4-BN-MAS composite, with its outstanding comprehensive performance, marks a significant advancement for materials used in high-temperature wave transmission applications.

THERMAL SHOCK BEHAVIORS OF MgAlON AND MgAlON-BN COMPOSITE REFRACTORIES

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

High pressure sintering behavior and mechanical properties of cBN-Ti 3Al and cBN-Ti 3Al-Al composite materials

Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics

Thermal Shock Resistance Behavior of Machinable Al2O3/BN Nanocomposites

Effect of Boron Nitride Content on Mechanical、dielectric and Thermal Shock Resistance Properties of Si3N4-BN-MAS Composites

Effects of Aln Content on the Thermal Properties and Thermal Shock Resistance of Bn Matrix Composite Ceramic

Thermal Shock Behaviors of AlN / BN Laminated Ceramic Composites

Thermal Shock Resistance of Si3N4/h-BN Composites Prepared Via Catalytic Reaction-Bonding Route

Effect of aln content on the microstructure and mechanical properties of bn-based composites

Mechanical Properties and Thermal Shock Resistance of BaAl2Si2O8/BN Ceramic Composites

Microstructure, mechanical properties and thermal shock resistance of hot-pressed ZrO2(3Y)-BN composites

High-pressure synthesis of Al<sub>2</sub>O<sub>3</sub>-cBN composites: Effect of thermodynamic condition and cBN volume fraction on their microstructure and properties

Cyclic thermal shock resistance of h-BN composite ceramics with La<sub>2</sub>O<sub>3</sub>-Al<sub>2</sub>O<sub>3</sub>-SiO<sub>2</sub> addition

Thermal Shock Behavior of Si 3 N 4 /BN Fibrous Monolithic Ceramics.

Thermal properties and thermal shock resistance of BAS-BN composite ceramics

Thermal Shock Behavior of Si3N4/BN Fibrous Monolithic Ceramics

Thermal durability of aluminum titanate-mullite composites with high thermal shock resistance

Effect of ZrO2 content on microstructure, mechanical properties and thermal shock resistance of (ZrB2+3Y-ZrO2)/BN composites

Effect of the Starting AlN Content on the Phase Formation and Property of the Novel In-Situ Fabricated X-SiAlON/BN Composites

Microstructure, mechanical properties and thermal shock behavior of h-BN–AlN ceramic composites prepared by combustion synthesis