Abstract:The use of ceramics such as alumina in moving components often requires the addition of low friction materials such as graphite. A new strategy for improving toughness, strength, and thermal-shock resistance of Al2O3-graphite self-lubricating composites was proposed in this study. Alumina layers embedded between Al2O3-graphite layers were fabricated and tested after thermal shock conditions ranging between 500 degrees C and 800 degrees C maximum temperature. Retained strength and apparent fracture toughness after the tests were compared to room temperature values. Results show that compressive residual stresses generated in the outer Al2O3-graphite layers during cooling down from sintering improve the failure resistance of the materials. The introduction of heat-resistant particles (Al2O3 particles) into graphite layers combined with a layered architecture can greatly decrease the oxidation degradation of the materials below 500 degrees C. In addition, the retained strength and toughness in the layered architectures after thermal shock between 550 degrees C and 800 degrees C remains constant, thus indicating that the new-developed Al2O3/Al2O3-graphite laminated composites may be reliable candidates for self-lubricating applications also for elevated temperatures.

Influence of Tungsten Carbide Particles on Resistance of Alumina Matrix Ceramics to Thermal Shock

Resistance of alumina-copper composite to thermal shock

The thermal shock behavior of alumina-copper composite

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Thermal Shock Resistance for Wisker and Particle Toughing Al2O3 Ceramic Matrix Composites

Influence of a Piezoelectric Secondary Phase on Thermal Shock Resistance of Alumina‐Matrix Ceramics

Enhanced thermal shock response of Al 2 O 3 –graphite composites through a layered architectural design

The influence of addition of WC particles on mechanical properties of alumina–matrix composite

Damage-tolerant Laminated Composites in Thermal Shock

Influence of cobalt phase on mechanical properties and thermal shock performance of Al2O3–TiC composites

Design and characterization of therm-al shock resistance of several typical zirconia reinforced alumina ceramic composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Thermal Shock Resistance Behavior of Machinable Al2O3/BN Nanocomposites

Thermal durability of aluminum titanate-mullite composites with high thermal shock resistance

Study on Thermal Shock Resistance of Alumina Composite Ceramics by Indention Quenching Method

Influence of Thermal Shock Damage on the Flexure Strength of Alumina Ceramic at Different Temperatures

Fabrication And Plasma Arc Thermal Shock Resistance Of Hfb2-Based Ultra High Temperature Ceramics

Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere

Mechanical Properties and Thermal-shock Resistance of Cobalt-coated Al_2O_3/TiC Composites

Effects of Aln Content on the Thermal Properties and Thermal Shock Resistance of Bn Matrix Composite Ceramic

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite