Abstract:A comprehensive CFD–DEM numerical model has been developed to simulate the biomass gasification process in a fluidized bed reactor. The methodology is based on an Eulerian–Lagrangian concept, which uses an Eulerian method for gas phase and a discrete element method (DEM) for particle phase. Each particle is individually tracked and associated with multiple physical (size, density, composition, and temperature) and thermo-chemical (reactive or inert) properties. Particle collisions, hydrodynamics of dense gas-particle flow in fluidized beds, turbulence, heat and mass transfer, radiation, particle shrinkage, pyrolysis, and homogeneous and heterogeneous chemical reactions are all considered during biomass gasification with steam. A sensitivity analysis is performed to test the integrated model׳s response to variations in three different operating parameters (reactor temperature, steam/biomass mass ratio, and biomass injection position). Simulation results are analyzed both qualitatively and quantitatively in terms of particle flow pattern, particle mixing and entrainment, bed pressure drop, product gas composition, and carbon conversion. Results show that higher temperatures are favorable for the products in endothermic reactions (e.g. H2 and CO). With the increase of steam/biomass mass ratio, H2 and CO2 concentrations increase while CO concentration decreases. The carbon conversion decreases as the height of injection point increases owing to both an increase of solid entrainment and a decrease of particle residence time and particle temperature. Meanwhile, the calculated results compare well with the experimental data available in the literature. This indicates that the proposed CFD–DEM model and simulations are successful and it can play an important role in the multi-scale modeling of biomass gasification or combustion in fluidized bed reactor.

CFD-DEM Modeling of Sewage Sludge Flow in a Vertical Falling Pyrolysis Reactor

Simulation of Biomass Pyrolysis in a Rotary Drum by Coupling CFD-DEM with a One-Dimensional Thermally Thick Model

Multiscale Modeling of Plastic Pyrolysis with a Neural Network-Inspired Pyrolysis Kinetic Model and Coarse-Grained DEM-CFD

Impact of the Reactor Structure on Biomass Pyrolysis in Fluidized-Bed Reactors: A Coarse-Grained CFD-DEM Study

CFD-DEM Modeling of Rod-Like Particles in a Fluidized Bed with Complex Geometry

CFD-DEM Simulation of Flow and Mixing Behavior in Downers with Different Entrance Structures

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

CFD–DEM Simulation of Heat Transfer and Reaction Characteristics of Pyrolysis Process of MSW Heated by High-Temperature Flue Gas

CFD-DEM Simulation of Fluidized Bed with an Immersed Tube Using a Coarse-Grain Model

CFD simulation of combustible solid waste pyrolysis in a fluidized bed reactor

CFD-DEM Simulation of Fluidization of Polyhedral Particles in a Fluidized Bed

CFD–DEM simulation of biomass gasification with steam in a fluidized bed reactor

Investigation on Pyrolysis Characteristics and Kinetics of Sewage Sludge with Different Heat-Mass Transfer Rates

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Multi-Scale Simulation of Biomass Gasification in Fluidized Beds

CFD-DEM Investigation of the Fluidization of Binary Mixtures Containing Rod-Like Particles and Spherical Particles in a Fluidized Bed

Computational Fluid Dynamics/Discrete Element Method Investigation on the Biomass Fast Pyrolysis: the Influences of Shrinkage Patterns and Operating Parameters

CFD-DEM simulations of municipal solid waste gasification in a pilot-scale direct-melting furnace

CFD-DEM Simulation of Heat Transfer in Fluidized Beds: Model Verification, Validation, and Application

Experimental study and modeling analysis of sewage sludge smoldering combustion at different airflow rates

Comprehensive DEM-CFD model and thermal uniformity optimization for biomass catalytic pyrolysis reactor