Abstract:As a means of non-contact measurement of blade vibrations, blade tip timing (BTT) has good application prospects for blade design verification and health monitoring. In BTT, the sensor arrangement directly determines the effectiveness of the extracted signal and ultimately affects the quality of the identified vibration parameters. In previous research on optimizing sensor arrangements, the position of each sensor is often selected from among multiple uniformly distributed virtual positions, which limits the optimization space. Moreover, to verify the performance of a sensor arrangement, a highprecision experimental calibration platform is required. However, it is often difficult for the precision to meet the requirements for a benchmark due to an inability to measure the actual blade vibrations. This paper optimized the sensor arrangement by simultaneously considering the mutual coherence and the approximate distance between sensing matrices for an equiangular tight frame in arbitrary-angle compressive sensing method. To avoid the uncertainty in blade displacement conversion in traditional calibration, such as with strain gauges, a laser displacement sensor connected to a slip ring was used to measure directly the displacement of the blade due to vibration. Besides, a macro-fiber composite was used to apply an excitation with a precise frequency to the blade at different speeds to make the blade vibrate synchronously or asynchronously. Then the performance of sensor arrangements optimized by the proposed method as well as other methods, such as mutual coherence, were verified on the self-developed BTT experimental calibration platform. The experimental results show that the signals identified with the optimized sensor arrangements are in good agreement with measurements made by the laser displacement sensor. The amplitude accuracy was more than 76.5% and 91.3% for synchronous and asynchronous vibrations, respectively. Moreover, the identification results were stable after data from 1 or 2 random sensors were removed. This shows the method has good reconstruction accuracy and sensor redundancy.

Optimization of Nonuniform Sensor Placement for Blade Tip Timing Based on Equiangular Tight Frame Theory

A New Method for Non-Uniform Under-Sampled Blade Tip Timing Signal Reconstruction

Physical Constraints Fused Equiangular Tight Frame Method for Blade Tip Timing Sensor Arrangement

Experimental Study on the Optimization of the Sensor Arrangement for Blade Tip Timing Measurement

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades

Optimal Placement of Blade Tip Timing Sensors Considering Multi-mode Vibration Using Evolutionary Algorithms

Single-Probe Blade Tip Timing: A Novel Method for Anomaly Identification Based on Frequency Shift.

Optimization and assessment of blade tip timing probe layout with concrete autoencoder and reconstruction error

Time Delay-Based Spectrum Reconstruction for Nonuniform and Sub-Nyquist Sampling in Blade Tip Timing

Sparse Reconstruction Method of Non-Uniform Sampling and its Application in Blade Tip Timing System

Parameter Identification Based on Iterative Signal Space in Blade Tip Timing

Spatial Transformation of General Sampling-Aliasing Frequency Region for Rotating-Blade Parameter Identification with Emphasis on Single-Probe Blade Tip-Timing Measurement

Coprime and Nested Samplings-Based Spectrum Reconstruction in Blade Tip Timing

Improved Minimum Variance Distortionless Response Spectrum Method for Efficient and Robust Non-Uniform Undersampled Frequency Identification in Blade Tip Timing

An Improved Multiple Signal Classification for Nonuniform Sampling in Blade Tip Timing

Adaptive Iterative Approach for Efficient Signal Processing of Blade Tip Timing

Single-probe Blade Tip Timing Based on Sparse Bayesian Learning

Min-Max Probe Placement and Extended Relaxation Estimation Method for Processing Blade Tip Timing Signals

Sparse Representation Based Frequency Detection and Uncertainty Reduction in Blade Tip Timing Measurement for Multi-Mode Blade Vibration Monitoring

Sparsity-based Compressed Covariance Sensing for Spectrum Reconstruction in Blade Tip Timing.

Forward-backward Spatial Smoothing for Snapshot Matrix Construction of Blade Tip Timing Signal