Abstract:As a means of non-contact measurement of blade vibrations, blade tip timing (BTT) has good application prospects for blade design verification and health monitoring. In BTT, the sensor arrangement directly determines the effectiveness of the extracted signal and ultimately affects the quality of the identified vibration parameters. In previous research on optimizing sensor arrangements, the position of each sensor is often selected from among multiple uniformly distributed virtual positions, which limits the optimization space. Moreover, to verify the performance of a sensor arrangement, a highprecision experimental calibration platform is required. However, it is often difficult for the precision to meet the requirements for a benchmark due to an inability to measure the actual blade vibrations. This paper optimized the sensor arrangement by simultaneously considering the mutual coherence and the approximate distance between sensing matrices for an equiangular tight frame in arbitrary-angle compressive sensing method. To avoid the uncertainty in blade displacement conversion in traditional calibration, such as with strain gauges, a laser displacement sensor connected to a slip ring was used to measure directly the displacement of the blade due to vibration. Besides, a macro-fiber composite was used to apply an excitation with a precise frequency to the blade at different speeds to make the blade vibrate synchronously or asynchronously. Then the performance of sensor arrangements optimized by the proposed method as well as other methods, such as mutual coherence, were verified on the self-developed BTT experimental calibration platform. The experimental results show that the signals identified with the optimized sensor arrangements are in good agreement with measurements made by the laser displacement sensor. The amplitude accuracy was more than 76.5% and 91.3% for synchronous and asynchronous vibrations, respectively. Moreover, the identification results were stable after data from 1 or 2 random sensors were removed. This shows the method has good reconstruction accuracy and sensor redundancy.

Sparse Reconstruction Method of Non-Uniform Sampling and its Application in Blade Tip Timing System

A New Method for Non-Uniform Under-Sampled Blade Tip Timing Signal Reconstruction

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades

Time Delay-Based Spectrum Reconstruction for Nonuniform and Sub-Nyquist Sampling in Blade Tip Timing

Sparse Representation Based Frequency Detection and Uncertainty Reduction in Blade Tip Timing Measurement for Multi-Mode Blade Vibration Monitoring

Sparsity-based Compressed Covariance Sensing for Spectrum Reconstruction in Blade Tip Timing.

Coprime and Nested Samplings-Based Spectrum Reconstruction in Blade Tip Timing

Optimization of Nonuniform Sensor Placement for Blade Tip Timing Based on Equiangular Tight Frame Theory

Super-Resolution Power Spectrum Estimation for Blade Tip Timing Measurement

Experimental Investigation on the Accuracy of Blade Tip Timing Spectral Analysis Methods

Single-Probe Blade Tip Timing: A Novel Method for Anomaly Identification Based on Frequency Shift.

Non-convex Sparse Regularization Via Convex Optimization for Blade Tip Timing

Sparse reconstruction for blade tip timing signal using generalized minimax-concave penalty

A Single-Probe Blade Tip Timing Method for Fast Extraction of Blade Natural Frequency

Experimental Study on the Optimization of the Sensor Arrangement for Blade Tip Timing Measurement

Reconstruction of blade tip-timing signals based on the MUSIC algorithm

A Novel Blade Vibration Monitoring Experimental System Based on Blade Tip Sensing.

The connection between digital-twin model and physical space for rotating blade: an atomic norm-based BTT undersampled signal reconstruction method

Spatial Transformation of General Sampling-Aliasing Frequency Region for Rotating-Blade Parameter Identification with Emphasis on Single-Probe Blade Tip-Timing Measurement

Parameter Identification Based on Iterative Signal Space in Blade Tip Timing

Blade Tip Timing Signal Filtering Method Based on Sampling Aliasing Frequency Map