Abstract:Blade tip timing (BTT) as a non-contact measurement technique can identify the blade vibration parameters. However, the signal recorded by BTT usually does not satisfy the Nyquist sampling theorem. To monitor blade crack propagation, it is important to accurately reconstruct the BTT signal to track the natural frequency shift of the rotor blade. In this paper, a sparse reconstruction method named block-accelerated orthogonal least-squares (Block-AOLS) is proposed to reconstruct the undersampled BTT signal in the time-frequency domain. Block-AOLS not only inherits the advantage of the high accuracy of AOLS but also makes use of the characteristic of block sparsity to reduce the interference components in the BTT signal. Furthermore, Block-AOLS is used to reconstruct the undersampled BTT signal to track the natural frequencies of cracked blades. The advantage of Block-AOLS is illustrated through simulation by comparing with the classical orthogonal matching pursuit. In the spin testing, the vibration of a blisk with eight blades is measured by both BTT and strain gauges, where two symmetrical blades without artificial cracks suddenly broke. The process of crack propagation can be inferred according to the shift of natural frequencies between the perfect and cracked blades. Moreover, a vibration frequency prediction method is provided to avoid comparing the natural frequencies among different blades for crack propagation monitoring, which is suitable to monitor the mistuning blades. To verify the reliability of the crack propagation monitoring using BTT, the strain signal with interval sample is analyzed by synchroextracting transform. Compared the natural frequency of the perfect blade with that of the cracked blade, the time when the natural frequency of the cracked blade shift is the same as that of the BTT result.

Forward-backward Spatial Smoothing for Snapshot Matrix Construction of Blade Tip Timing Signal

A New Method for Non-Uniform Under-Sampled Blade Tip Timing Signal Reconstruction

An Improved Key-Phase-Free Blade Tip-Timing Technique for Nonstationary Test Conditions and Its Application on Large-Scale Centrifugal Compressor Blades

Parameter Identification Based on Iterative Signal Space in Blade Tip Timing

Time Delay-Based Spectrum Reconstruction for Nonuniform and Sub-Nyquist Sampling in Blade Tip Timing

Min-Max Probe Placement and Extended Relaxation Estimation Method for Processing Blade Tip Timing Signals

Optimization of Nonuniform Sensor Placement for Blade Tip Timing Based on Equiangular Tight Frame Theory

Blade Tip Timing Signal Filtering Method Based on Sampling Aliasing Frequency Map

Coprime and Nested Samplings-Based Spectrum Reconstruction in Blade Tip Timing

Spatial Transformation of General Sampling-Aliasing Frequency Region for Rotating-Blade Parameter Identification with Emphasis on Single-Probe Blade Tip-Timing Measurement

Sparsity-based Compressed Covariance Sensing for Spectrum Reconstruction in Blade Tip Timing.

An Autocorrelation Method for Asynchronous Vibration Feature Extraction in Blade Tip Timing

Adaptive Iterative Approach for Efficient Signal Processing of Blade Tip Timing

Biprobes Blade Tip Timing Method for Frequency Identification Based on Active Aliasing Time-Delay Estimation and Dealiasing.

Single-Probe Blade Tip Timing: A Novel Method for Anomaly Identification Based on Frequency Shift.

Blade Tip Timing for Monitoring Crack Propagation of Rotor Blades Using Block-AOLS

Blade Tip Timing: from Raw Data to Parameters Identification

A Single-Probe Blade Tip Timing Method for Fast Extraction of Blade Natural Frequency

Sparse Reconstruction Method of Non-Uniform Sampling and its Application in Blade Tip Timing System

Super-Resolution Power Spectrum Estimation for Blade Tip Timing Measurement

A Novel Blade Vibration Monitoring Experimental System Based on Blade Tip Sensing.