Abstract:To bring the potential power of the capacitively coupled contactless conductivity detection ((CD)-D-4) technique to full play and extend the application fields of (CD)-D-4, our previous work has developed a (CD)-D-4 sensor which is suitable for conductivity detection of electrolyte solution in industrial fields (Sensors and Actuators A 213 (2014) 1-8). With the introduction of series resonance principle, the (CD)-D-4 sensor can overcome the influence of coupling capacitances on conductivity measurement. By a specific design of shield configuration, the (CD)-D-4 sensor can overcome the influence of stray capacitances and the environment interference in industrial fields. Although the measurement performance of the (CD)-D-4 sensor is satisfactory and it is suitable for the conductivity detection in industrial fields, the input-output characteristic of the (CD)-D-4 sensor is non-monotonic, which may limit the practical applications of the (CD)-D-4 sensor. To overcome this drawback, an improved (CD)-D-4 sensor for conductivity detection in industrial fields has been developed. The basic conductivity measurement method (the series resonance principle) and the shield configuration of the improved (CD)-D-4 sensor are the same as those of the (CD)-D-4 sensor in our previous work. However, the measurement circuit of the detection path of the improved (CD)-D-4 sensor has been optimized. The one-inductor design has been replaced by a two-inductor design. With this optimization, the input-output characteristic of the improved (CD)-D-4 sensor is theoretically monotonic. Conductivity measurement experiments were carried out on four pipes with inner diameters of 1.8 mm, 3.3 mm, 5.0 mm and 7.6 mm, respectively. The experimental results indicate that the development of the improved (CD)-D-4 sensor is successful. In comparison with the previous (CD)-D-4 sensor, the measurement accuracy of the improved (CD)-D-4 sensor is comparable. But, the improved (CD)-D-4 sensor has the advantages of the monotonic input-output characteristic and the convenience for practical conductivity detection in industrial fields. Meanwhile, it is found that the input-output characteristic of the improved (CD)-D-4 sensor is nonlinear and the sensitivity of the improved (CD)-D-4 sensor decreases with the increase of conductivity. (C) 2015 Elsevier B.V. All rights reserved.

A Synchronous Demodulation Technology Based on Sample-and-hold for Eddy Current Sensors

A High Resolution Synchronous Demodulation Method Based on Gated Integrator for Precision Sensors

Harmonic and Reactive Current Synchronous Detecting Method Based on DSP

A CMOS Magnetic Sensor Based on Synchronous Sampling Function

An Improved Capacitively Coupled Contactless Conductivity Detection Sensor for Industrial Applications

Design of ultrastable and high resolution eddy-current displacement sensor system

An Eddy Current Displacement Sensor Based on Piecewise Linearization of Inverse Function

Single-Ended Eddy Current Micro-Displacement Sensor with High Precision Based on Temperature Compensation

Design and Realization of the Impedance Signal Decomposer in Eddy Current Instruments Based on DDS Techniques

Digital Eddy Current Detection Method Based on High-Speed Sampling with STM32

Pulsed Excitation and Dual-parameter Measurement Method for Eddy Current Sensor

Research on the Feasibility of Eddy Current Displacement Sensor with Temperature Variation for Non-Ferromagnetic Detection Material

A Novel Eddy Current Sensor for Displacement Measurement with High Accuracy and Long Range

Synchronous Digital Quadrature Demodulation Technique For Resonant Optic Gyroscopes

Design and analysis of an eddy current displacement sensor with extended linear range

Design of a Digital Eddy Current Displacement Sensor Based on FPGA

A HIGH-PRECISION SYNCHRONOUS SAMPLING APPROACH FOR LARGE-SCALE DISTRIBUTED WIRE SENSOR NETWORKS IN SEISMIC DATA ACQUISITION SYSTEMS

Suppression of Low-Frequency Magnetic Interference on Eddy Current Displacement Sensor with Nanometer Resolution

Eddy Current Displacement Sensor with Ultrahigh Resolution Obtained Through the Noise Suppression of Excitation Voltage

Novel Direct Digital Interface of Frequency-Modulated Eddy-Current Displacement Sensor (ECDS) for Real-Time Control of AMB

Sagnac Magnetic Field Sensor Based on Sinusoidal Modulation and Empirical Mode Decomposition